Summary of Contents for Frontier TC302
- Page 1 1-Drawer Tool Cart Model No:TC302 INSTRUCTION IMPORTANT: Please read this manual before using this MANUAL tool cart and save it for reference...
- Page 2 • To reduce the risk of serious injury, read the following safety instructions before assembling and using the cart • The product should be positioned on a level surface. • Any assembly or maintenance of the product must be carried out by adults only. •...
- Page 3 Model No TC302 SPECIFICATIONS 165 lb (75 kg) Maximum Load 50 lb (22.7 kg) Maximum Load For The Drawer 100 lb (45.5 kg) Maximum Load For Each Castor Gross Weight 44 lb (20 kg) 165 lb (75 kg)
- Page 4 KEY PARTS DIAGRAM A) Upper tray with EVA mat B) Leg 4 PCS C) Middle tray D) Bottom tray E) Handle F) Fixed castor G) Swivel castor 2 PCS 2 PCS with brake I) Bolt M6 x 12 J) Nut M8 K) Washer M8 H) Side tray 26 PCS...
- Page 5 Model No TC302 ASSEMBLY Mount the castors to the bottom tray. Bolt the two fixed castors (F) to one side of the bottom tray (D) with eight M8 x 16 bolts (L), eight M8 washers (K) and eight M8 nuts (J).
- Page 6 Remove the drawer from the upper tray (A), and attach to the top of the four legs with eight bolts (I) as shown below. Attach the handle (E) to the end with the swivel castors (G) using four bolts (N) and two nuts (M).
- Page 7 Model No TC302 SAFETY WARNINGS AND CAUTIONS DO NOT stand on this product . You may fall which may cause personal injury. When moving this product, do not pull it. Push the product to prevent personal injury. BE CAREFUL when opening the drawer. The product may become unstable and tip, which may cause personal injury or product damage.
Need help?
Do you have a question about the TC302 and is the answer not in the manual?
Questions and answers