Changing The Blade - Timbertech RSSR01 Original Instruction Manual

c
WARNING!
DO NOT switch on the tool when installing or removing the blade assembly. Risk of injury!
1
t
he BlAde AssemBly cAn Be chAnged RApidly And expediently WithOut the
use OF Any tOOl
1. Hold the tool as shown in the above figure with one hand. Then push both lateral buttons of
the blade assembly simultaneously and remove it from the tool.
2. Install the new blade assembly. Before installing the new blade assembly, make sure that
the gear unit is free of dirt, grease and other foreign objects.
IMPORTANT! Remove the clippings from the gear unit.
EN
hAnging the BlAde
54
A
ssemBly
2