Cleaning And Maintenance; Spa Cover; Draining Your Portable Spa; Cleaning And Replacing The Filter - Coleman 37 jets legend Owner's Manual

Cleaning and Maintenance

Spa Cover

Important! Keep the spa covered when not in use!
• Covered spas will use less electricity in maintaining
your set temperature.
• Covering your spa will protect your spa's finish
from the sun's ultraviolet rays.
• You are required to keep the spa covered to
maintain warranty coverage.
• Covering your spa helps prevent children from
drowning in the spa.

Draining Your Portable Spa

1. Turn off the power at the breaker.
2. Remove all filters.
3. Using a Phillips screwdriver, remove the screws
to the access panel and open it.

Cleaning and Replacing the Filter

Filtration is one of the most important steps you can take to ensure clean, clear water. It is far less expensive
to fix water clarity problems by filtering your spa than by using excessive amounts of chemicals, excessive
filtration times, or by water replacement.
See the section "Clear Water Plan" for more information on cleaning your filter.
Coleman Spas
®
LTR50001090, Rev. D
See the manual enclosed with your cover for
instructions on mounting the locks and how to lock
and unlock the cover.
In addition, while the spa cover is rigid, it is not
designed to support any weight. Therefore, as a
safety precaution and to preserve the life of your
cover, you must not sit, stand, or lie on it, nor should
you place objects of any kind on top of it.
4. Locate hose ending with the ¾ inch hose-bib
fixture.
5. Unscrew the cap.
6. Hook up the female end of a garden hose to the
drain fitting.
7. Place the other end of the garden hose where
you would like the water to drain to.
8. Turn the valve on the hose-bib fixture to open
the drain.
9. Let spa drain completely, then remove garden
hose.
10. Turn the valve on the hose-bib fixture to close
the drain.
11. Replace the cap.
27
Coleman logo (white)
<----------