Operating Instructions VACUUM CLEANER ❈ Before operating this unit, please read the instructions carefully. ❈ For indoor use only. Register your product at www.samsung.com/global/register...
IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING : Do not use the vacuum cleaner when rug or floor is wet. Do not use to suck up water.
OPERATING THE CLEANER 2-1 POWER CORD 2-3 POWER CONTROL 1) HANDLE CONTROL TYPE • SLIDE TO THE STOP POSITION Vacuum cleaner switches off. (stand by mode) • SLIDE FORWARD TO MAX Suction capacity increase smoothly up to maximum. 2) BODY CONTROL TYPE MIN = For delicate surface e.
Page 5
2-5 USING FLOOR TOOLS Carpets Bare floors Detach transparent drum cover for easy cleaning. OPTION Clogs on turbine keeps brush from turning, and in this case, take care of it. OPTION Remove waste matter completely when Brush for inlet is blocked. blanket Warning : Use for bedclothes only.
DUST FULL INDICATOR CHANGING THE DUST BAG CLEANING THE CYCLONE FILTER(Optional) If the "DUST FULL" indicator turns to red color while you are cleaning, the dust bag requires replacement NOTE : If the "DUST FULL" indicator continues to display red color even after having changed bag into new one, turn the cleaner off and check if there is any clogging in the hose, tube, floor nozzle, or on the inlet/outlet filter.
CLEANING THE INLET FILTER NOTE : Regularly check if the filter gets clogged and if so, remove the dust particles from the filter as filter clogging may cause the damage on the motor or suction decrease. OUTLET FILTER - IF YOU HAVE A PROBLEM PROBLEM Motor does not start.