Table of Contents
Advertisement
Quick Links
DALCNET S.r.l.
Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy
Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy
Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453
VAT: IT-04023100235
info@dalcnet.com www.dalcnet.com
➔
For the whole and updated Device Manual refer to producer's website:
Constant current variants
Application: Dimmer
CODE
DLB1248-1CC350-BLE
DLB1248-1CC500-BLE
DLB1248-1CC700-BLE
DLB1248-1CC950-BLE
Any current value in range from 150mA to 1200mA is available on demand.
Constant voltage variants
Application: Dimmer
CODE
DLB1248-1CV-BLE
Protections
OTP
Over temperature protection
OVP
Over voltage protection
UVP
Under voltage protection
RVP
Reverse polarity protection
IFP
Input fuse protection
SCP
Short circuit protection
OCP
Open circuit protection
CLP
Current limit protection
DLB1248 single channel
DLB1248
EASY-BLE
Device Manual
FEATURES
• BLUETOOTH+FADER+DIMMER+DRIVER
• DC Input: 12-24-48 Vdc
• Remote command options:
- Bluetooth Low Energy (BLE/Smart)
• Local command options:
- Normally Open push-button
• Adjusting the brightness of white light
• Current outputs or voltage outputs for R-L-C loads
• Typical efficiency > 95%
• Adjusting the brightness up to completed off
• Soft start and soft stop
• Optimized output curve
• Extended temperature range
• 100% Functional test - 5 Years warranty
Input voltage
Output
12-48V DC
1 x 350mA
12-48V DC
1 x 500mA
12-48V DC
1 x 700mA
12-48V DC
1 x 950mA
Input voltage
Output
12-48V DC
1 x 8A max
single channel
http://www.dalcnet.com
Channels Commands
1
BLE – 1 N.O. push button
1
BLE – 1 N.O. push button
1
BLE – 1 N.O. push button
1
BLE – 1 N.O. push button
Channels Commands
1
BLE – 1 N.O. push button
Made in Italy
Rev. 2016-12-16
FW 1.0+
LED DRIVERS
pag. 1/10
Advertisement
Table of Contents
Related Manuals for DALCNET DLB1248 Series
Summary of Contents for DALCNET DLB1248 Series
- Page 1 DALCNET S.r.l. DLB1248 single channel Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy EASY-BLE Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev.
-
Page 2: Reference Standards
DALCNET S.r.l. DLB1248 single channel Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy EASY-BLE Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev. -
Page 3: Installation
DALCNET S.r.l. DLB1248 single channel Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy EASY-BLE Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev. -
Page 4: Technical Notes
DALCNET S.r.l. DLB1248 single channel Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy EASY-BLE Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev. -
Page 5: Local Command
DALCNET S.r.l. DLB1248 single channel Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy EASY-BLE Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev. - Page 6 DALCNET S.r.l. DLB1248 single channel Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy EASY-BLE Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev.
- Page 7 Necessary conditions for the correct use of the device: • APPLE devices with ON Bluetooth Low Energy 4.1 version • ANDROID devices with ON Bluetooth Low Energy 4.1 version • Dalcnet Product DLB1248 with BLE smart function • Strip Led or spotlight • N.O. Push-Button •...
- Page 8 On the version of Android 6.0 is necessary to allow at BlueDimmer application to access your location. START UP SEQUENCE IMAGES Automatic research and identification of DALCNET DLB1248 with BLE function products. N.B.: Manual research is possible by clicking on the lens symbol at the bottom of your device's screen.
- Page 9 2 – Keep press for 5 sec the push button connected to the light-on-led for pairing. 3 – On the screen will appear a box to name the strip led or spotlight controlled by DALCNET BLE device. For ex.: you can name 'kitchen' the light in the kitchen, and 'living' the one in the living room. This is a simple way to control the lights in your house.
- Page 10 FW 1.0+ pag. 10/10 info@dalcnet.com www.dalcnet.com 4 – DALCNET device has now been correctly paired and ready for use. You will see the lamp name on the display. Here you can start controlling your led light. LEGEND: on / off dimmer back to search devices menù...