Procedure To Re-Assemble Rear Cover - Sony RB1G Service Manual

2018/06/22 14:39:14 (GMT+09:00)
Safety Notes

1-2. Procedure to re-assemble Rear Cover

Assemble rear cover as a direction
Alignment: Bottom right corner
1. Assemble rear cover as a
direction
4. Tighten all screw for rear
cover, AC cover & stand AC
joint screw except four
stand screw
2. Lay down rear cover top
side to assemble
& t d
5. Connect AC cord connector, install AC
cover & tighten the screw
3. Check all side whether its
properly insert
6. Put stand as direction and
tighten four stand screw
6
SYS SET