DISASSEMBLY INSTRUCTIONS
1-4: POWER PCB (Refer to Fig. 1-4)
1. Remove the 6 screws (1).
2. Disconnect the following connector: (CP7001).
3. Remove the Power PCB in the direction of arrow (A).
4. Remove the 2 screws (2).
5. Remove the Angle Hing in the direction of arrow (B).
(1)
(1)
(1)
(1)
(1)
Power PCB
(1)
Angle Hing
(2)
(2)
(A)
(B)
Fig. 1-4
B1-2