Rec Setting - Sony RB1G Service Manual

Service Adjustment
4-10. VCOM Adjustment (HFR-SDC Panel)
4-10-1. STEP1
1. in "VPC" service mode
a.
VPC SERVICE
002 VCOM
b.
000 ENABLE 0
c.
4-8-2. STEP2
2. in "VPC" service mode
a.
VPC SERVICE
b.
002 VCOM
001 ADJUST 64
c.
d.
4-11. REC Setting (Japan/Europe/Australia/New Zealand)
4-11-1. STEP1
DIGITAL (DIG_SRV_MODE)
REC_SETTING
* 1 Key Copy
2 HDD Re-Register
1. in "Digital" service mode
a.Select "003 DIG_SRV_MODE" category by pressing "2 / 5" on remote.
b. Select "006 REC_SETTING " item by pressing "1 / 4" on remote.
c. Press "0" or "10" to go to detailed REC Setting screen.
Select "002 VCOM" category by pressing "2 /
5" on remote.
Select "000 ENABLE" item by pressing "1 / 4"
on remote..
Change ENABLE from "0" to "1" by pressing
"3" to enable VCOM adjustment.
Select "002 VCOM" category by pressing
"2 / 5" on remote.
Select "001 ADJUST" item by pressing "1 /
4" on remote.
Change data by pressing "3 / 6" on remote.
Every time you push the button, an
evaluation screen is displayed for 5
seconds.
Finish the adjustment when the picture
seems OK.
SERVICE
4-11-2. STEP2
2. in detailed REC setting screen
a. Press "1" to select "Key Copy" item
b. Press "Enter" or "12" twice to execute the command.
c. If OK, show the message "Key Copy OK". If NG, show the message
"Key Copy NG (= xx )".
d. Press "Return" to return to previous page.
DIGITAL (DIG_SRV_MODE) SERVICE
REC_SETTING
* 1 Key Copy
2 HDD Re-Register
Key Copy OK
4-11-3. STEP3
3. in detailed REC setting screen
a. Press "2" to select "HDD Re-Register" Item.
b. Press "Enter" or "12" twice to execute the command.
c. If OK, xx= x+1. If NG, xx=x.
d. Press "Return" to return to previous page.
DIGITAL (DIG_SRV_MODE) SERVICE
REC_SETTING
1 Key Copy
* 2 HDD Re-Register
(x) HDDs OK ( xx )
RB1G CHASSIS
W600A/ W603A/ W605A/ W607A/ W650A/ W651A/ W653A/
W654A/ W655A/ W656A/W657A/ W658A/ W670A/ W674A
DIGITAL (DIG_SRV_MODE) SERVICE
REC_SETTING
* 1 Key Copy
2 HDD Re-Register
Key Copy NG ( xx )
224