Advertisement
Available languages
Available languages
II Operation Guide
1. Charge
The battery is built-in lithium rechargeable battery, so
when you use it the first time, please charge firstly. The
method for charging as following:
1.) Connect computer: use USB cable to connect the
computer, then it can be charged.
2.) Use adaptor: connect charger plug with USB cable,
then plug into electrical connector receptacle, it can be
charged.
Notice: when battery power is not enough, Fingercam
will enter into protection mode, so it cannot be turn on.
Please charge for it now.
2. Power on to video
Press power button slightly, blue indicator light begins
to bright, now it enters into startup ready mode, which
can enter into standby mode quickly. Press record/
stop button slightly, blue indicator light begins to bright,
It has small contour design, which does UV
spray finishing for the whole body. It is very
fashionable and wearable and matches
with all kinds of portable tools.
Supports PC camera and chatting function
Supports AVI video format
It can carry out high definition image
recording under low illumination
Supports 30 fps for 720*480 video shoot
and output
Supports USB1.1 and USB2.0
Supports 16 GB T-flash card (maximum)
Build-in lithium battery which can make a
video more than two hours, the standby
time is up to 250 hours
9
Advertisement
