Download Print this page

Evermount EM-SBBU Instructions Manual

Advertisement

Available languages

Available languages

Quick Links

Instructional videos available at
SoundbarBrackets.com
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE! IF
YOU DO NOT UNDERSTAND THE INSTRUCTIONS, OR DO NOT FEEL THAT YOU CAN FOLLOW
THEM SAFELY, CONTACT A QUALIFIED CONTRACTOR. THE WARRANTY WILL BE HONOURED IF
ACCOMPANIED BY AN ORIGINAL SALES RECEIPT, AND ONLY IF THE INSTRUCTIONS HAVE
BEEN FOLLOWED EXACTLY.
Before beginning, please check to ensure you have all the parts listed below. To acquire missing
parts please visit www.everik.com/parts.html or call 1-866-604-6966.
The EverMount EM-SBBU is an universal soundbar bracket that is compatible with most flat panel
models and soundbar models.
A second person will be required to assist with the installation.
For additional assistance with your installation, you can view instructional videos at
www.SoundbarBrackets.com.
Do not exceed maximum load 35 lbs.
Description
M6x16mm
M8x16mm
M8x25mm
Medium washer
Large washer
1
Bolt Bag A
Qty.
2
2
2
2
2
PARTS LIST
Description
#10x3/4" bolt
Small washer
#10 hex nut
Soundbar Brackets
EM-SBBU
Bolt Bag B
Qty.
2
4
4
x2
SBBU.SB.102011.IM

Advertisement

loading

Summary of Contents for Evermount EM-SBBU

  • Page 1 Before beginning, please check to ensure you have all the parts listed below. To acquire missing parts please visit www.everik.com/parts.html or call 1-866-604-6966. The EverMount EM-SBBU is an universal soundbar bracket that is compatible with most flat panel models and soundbar models.
  • Page 2 Configuration 1: Installing Soundbar Brackets to a flat panel on a pedestal Step 1: Select the two bolts and two washers from Bolt Bag A that best fit the mounting hole pattern on the back of your flat panel. Step 2: See Fig. 1 for examples of multiple configurations you can use to adapt the bracket to match your flat panel and soundbar requirements.
  • Page 3: Maintenance

    Configuration 2: Installing Soundbar Brackets to a wall mounted flat panel NOTE: This product is designed to be sandwiched in between the back of the flat panel and the other wall mount as shown in Fig. 4. Since this will require using the wall mount hardware, Bolt Bag A will not be required.
  • Page 4 Pour obtenir des pièces manquantes, visitez www.everik.com/parts.html ou téléphonez au 1 866 604-6966. L'EverMount EM-SBBU est un support universel pour barre de son qui est compatible avec la plupart des modèles d'écrans plats et de barres de son. L'aide d'une seconde personne est requise pour l'installation.
  • Page 5 Configuration 1 : Installation des supports pour barre de son à sur un écran plat ou sur un socle Étape 1 : Sélectionnez les deux écrous et les deux rondelles du sac de boulons A qui correspondent le mieux aux trous de montage au dos de votre écran plat. Étape 2 : Consultez la Fig.
  • Page 6: Entretien

    Configuration 2 : Installation des supports pour barre de son sur un écran plat monté au mur REMARQUE : Ce produit est conçu pour être inséré entre le dos de l'écran plat et l'autre support mural, comme le montre la Fig. 4. Puisque vous utilisez le matériel de votre support mural, le sac de boulons A ne sera pas nécessaire.