Wahoo Fitness Cadence Sensor Manual

Download this manual

Setup

This setup guide is intended to assist with installing your Wahoo RPM Cadence sensor on your

bike or shoe and pairing to the Wahoo Fitness app.

1. Slide the Wahoo RPM Cadence pod into the silicone mount. Make sure the silicone

covers the Wahoo logo and the opening is on the back of the Wahoo RPM Cadence.

2. Thread one zip-tie through the slot on each side of the silicone mount.

3. Place the Wahoo RPM Cadence on the inside of the non-drive side crank arm. Spin the

crank around to make sure the Wahoo RPM Cadence does not interfere with the chain

stay on your bike.

4. Slide the zip-ties through, tighten them down, and trim the excess part of the zip-tie.

1. Make sure the Wahoo RPM Cadence and the inside of the non-drive side crank arm are

clean.

2. Peel off the backing to expose one side of the tape and stick it on the back side of the

Wahoo RPM Cadence. Then remove the other side of the tape and stick the Wahoo RPM

Cadence to the inside of the non-drive side crank arm.

3. Spin the crank arm to make sure the Wahoo RPM Cadence does not interfere with the

chain stay on your bike.

How to install the Wahoo RPM Cadence using the Shoe Clip

Mount:

1. Take the clip provided and lock in the Wahoo RPM Cadence by sliding it in horizontally

and then twisting it vertically into place.

2. Place on your shoe by threading the velcro strap from your shoe (or similar) through the

space in the back of the clip.

3. Make sure the sensor is attached to your shoe vertically with either the "w" or "o"

pointing toward the toe of the shoe. If it is horizontal with all letters facing the toe of the

shoe, it will not be able to capture data.

How to Pair your Wahoo RPM Cadence Sensor to the

Wahoo Fitness app (iOS):

1. Download the Wahoo Fitness app from the App Store.

2. Open the Wahoo Fitness app. Make sure you have Bluetooth turned on.

Page 1 Setup This setup guide is intended to assist with installing your Wahoo RPM Cadence sensor on your bike or shoe and pairing to the Wahoo Fitness app. How to install the Wahoo RPM Cadence on your bike: Using the Silicone Mount: 1.
Page 2 Your Wahoo RPM Cadence is now set up and ready for action. To use your Wahoo RPM Cadence, start a workout with one of the profiles you paired it with. The Wahoo Fitness app will remember this pairing in the future. You simply need to wake up your sensor and start a new...
Page 3 2. Select the red “Stop” button and either a) Discard Workout b) Save Workout or c) Return to Workout. 3. If you elect to finish the workout, the Wahoo Fitness app will now display a summary of your workout. Starting a Workout (Android): 1.
Page 4 1. To end your workout, simply select the red “Pause” button. 2. Select the red “Stop” button and either a) Discard b) Save or c) Cancel. 3. If you elect to save & finish the workout, the Wahoo Fitness app will now display a summary of your workout.
Page 5 Contact support for more information. If you use the Settings>Info+Help>Email Us function from within the Wahoo Fitness app it will attach a log with your query to better help us answer your questions. Use the Wahoo Utility app to test your hardware for connectivity issues (Android): 1.
Page 6 Water Rating: IPX7 (waterproof up to 5 ft/1.5m) Wireless Signal Strength: Up to 10 feet (3m)