Dubbing videos
DUBBING TO A VCR OR DVD/HDD
RECORDER
Videos recorded in this camcorder can be dubbed to a VCR or
DVD/HDD recorders.
•
Videos are dubbed to the other recording device via analogue data
transfer (composite connection). Use the supplied Audio/Video cable.
•
Use the AC power adaptor to power the camcorder when you dub
to a VCR or DVD/HDD recorder.
Camcorder
VCR or DVD/HDD
recorder
Signal flow
Audio/Video cable
1.
Connect your camcorder to the recording device (VCR or DVD/
HDD recorder) with the Audio/Video cable.
•
Connect your camcorder to the input jacks of the recording
device.
If your recording device has an input selector, set it to the
•
correct input mode.
2.
Insert the storage device (tape, disc, etc.) into the recording
device.
3.
Start the playback on your camcorder, and record it on the
recording device.
•
Refer to the instruction manuals supplied with your recording
device for details.
4.
When dubbing is finished, stop the recording device and your
camcorder.
•
Videos recorded on this camcorder can only be dubbed using
the Audio/Video cable in SD (standard definition) image quality,
regardless of the recording resolution (HD/SD).
•
You cannot dub to a recorder with an HDMI cable.
•
To copy a video recorded in HD (high defi nition) image quality, use
the internal software of your camcorder, and copy the video to your
computer.
page 97
•
Because dubbing is performed via analogue data transfer, the image
quality may deteriorate.
•
To hide the screen indicators (such as the counter, etc.) on the
screen of the connected monitor device set "TV Display: Off."
page 87
•
To record the date/time, display it on the screen.
page 81
93