Serious readers ROAM Light Instructions

Serious readers ROAM Light Instructions

Advertisement

Welcome to your ROAM Light™
We hope you will love your new ROAM Light™
Our eyes work best in balanced natural light.

Using your ROAM Light™

1. Remove the light from the packaging and place the light base
flat on a steady surface.
2. The power switch is a touch switch that controls ON/OFF power
and the brightness settings of the light.
Touch once to turn the light ON to 1st brightness setting.
Touch twice for the 2nd brightness setting.
Touch three times for the 3rd brightness setting.
Touch four times to turn the light OFF.
3. To position the light to suit your needs, hold the light base
steady and grasp either the flexible neck or lamp head
depending on the adjustment needed.
4. The LED panel might get hot after several hours of continuous
use. Turn the light off and wait until the lamp head is cool before
handling.
5. Do not alter the power adaptor. Indoor use only.
6. The lamp head is a sealed unit and cannot be replaced.

Battery and Charging

1. Charge your ROAM Light™ before use - shipped uncharged.
2. Connect the USB cable to the power adaptor and into the
connector in the rear-bottom of the light.

Battery Disposal

The ROAM Light™ is a sealed unit and the battery should not
be removed. Rechargeable batteries contain harmful materials,
and are classified as hazardous waste. They must never be
thrown away with daily rubbish. They should be returned to the
manufacturer or your local recycling service for disposal. Dispose
of the entire unit properly.
Serious Readers® is WEEE registered and provides a disposal
service at Unit 15 – 16 Faraday Road, Aylesbury, HP19 8RY.
Customer Service
+44 (0) 1296 390390
0800 028 1890 | +44 (0) 1296 390390
www.seriousreaders.com
Serious Readers, The Chapel, Bierton, Bucks, HP22 5DW. UK
1
year
3. Only use with the supplied power adaptor to avoid damage
or fire.
4. Charge the light using included USB cable or power adaptor.
It will take approximately 3.5 to 4 hours to charge. The LED
indicator on the rear of the light will change from RED to GREEN
when the light is fully charged. Note: battery charge will last
approximately two hours.

Specifications

Base Size – 2.625 in. x 3.625 in.
Height Adjusts – 10.75 in. to
18.75 in.
Colour Temperature – 5,000K
Brightness Settings – 3
Colour Rendering Index – 97
LED Life – 40,000 hours
Maximum Lumen Output – 273
Battery Safety
The ROAM Light™ is a sealed unit and the batteries should not
be removed.
Avoid extreme temperatures.
Use original or certified cables.
Do not expose to liquids.
Avoid dropping.
Do not disassemble.
Keep out of the reach of children.
ROAM
Light
Instructions
SR104
USB: 5V, 500mA / Input power:
5V/500mA
Battery: Lithium, 3.7V /
2000mAh
Power Adapter: Input: 100-240V,
50/60 Hz, 0.6A
Output: 5.0V DC, 1A
®
Readers

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ROAM Light and is the answer not in the manual?

Questions and answers

Summary of Contents for Serious readers ROAM Light

  • Page 1 Turn the light off and wait until the lamp head is cool before handling. 5. Do not alter the power adaptor. Indoor use only. • The ROAM Light™ is a sealed unit and the batteries should not 6. The lamp head is a sealed unit and cannot be replaced. be removed. •...
  • Page 2 Using the ROAM Light™ What’s in the box Changing the settings Lightly touch the switch to achieve the following: Touch once to Touch twice for Touch three times Touch four times turn ON to 1st 2nd brightness for 3rd brightness...

Table of Contents