1. Product Specifications The EFIS121 is Ethernet fingerprint image scanner based on sweeping fingerprint sensor from Atmel. It is designed for easy integration into security and/or service systems. EFIS121 supports 10/100 Mbps Ethernet interface 2 access modes, TCP client and TCP server...
2 Ethernet inputs provides DC power to the scanner (black cable on the picture) and at the same time connects EFIS121 to the network (yellow cable on the picture). It’s possible to use 2 types of passive PoE adapter.
The EFIS121scanner has a capability to change the IP address. The winconefis121.exe utility lets to modify the specific parameters. If the IP address of EFIS121 is forgotten, it’s possible to set the default IP address by slide switch. The default IP address is 192.168.100.2 port 5000...
Page 6
“Reboot”. The device will be rebooted and takes the network configuration from flash memory of device. Note: You must be sure, that the other network devices haven’t IP address 192.168.100.2 in your network. EFIS121 User’s Manual Page 6...
In passive mode the scanner works as TCP server and waits a connection from TCP client. If TCP client has the connection from EFIS121 the client application can get the fingerprint image and control other feature of device by SDK.
Page 8
- switch on the red led http://192.168.100.168/cgi-bin/control.cgi?led=red,on - switch off the red led http://192.168.100.168/cgi-bin/control.cgi?led=red,off If your network has DHCP server you can switch on DHCP service in EFIS121 (optional). Note: Better to use the DHCP service in active mode. EFIS121 User’s Manual Page 8...