Sonic Alert SBJ525SS Operation Instructions

Sonic boom alarm clock & bed shaker

Table of Contents

Download this manual

RHK-003 for Europe

IMPORTANT – Please read these instructions carefully before use and retain for future reference.

See operating instructions on back.

Use only the supplied adaptor to connect the unit.

Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture.

Before connecting to mains make sure that the requirements specified on the apparatus

corresponds to the available power supply i.e. AC230V 50Hz.

-- The ventilation should not be impeded by covering the ventilation openings with items

such as, newspaper, table cloth, curtains, etc;

-- No naked flame sources, such as lighted candles should be placed on the apparatus.

-- It shall not be exposed to dripping or splashing and that no objects filled with liquids,

such as vases, shall be placed on the apparatus.

-- Do not place the product in closed bookcases or racks without proper ventilation.

-- Where the mains plug is used as the disconnect device, the disconnect device shall

remain readily operable.

GENERAL DATA

Power Consumption: Adaptor AC6V~ 600MA)

CE Approved transformer for Europe

Sonic Alert

Sonic Boom Alarm Clock & Bed Shaker

Model SBJ525SS

OPERATION INSTRUCTIONS

Table of Contents

Do you have a question about the SBJ525SS and is the answer not in the manual?

Page 1 RHK-003 for Europe Sonic Alert Sonic Boom Alarm Clock & Bed Shaker Model SBJ525SS OPERATION INSTRUCTIONS IMPORTANT – Please read these instructions carefully before use and retain for future reference. See operating instructions on back. Use only the supplied adaptor to connect the unit.
Page 2 (1) year from the date of purchase. Within this period Sonic Alert will repair or replace at our option the SBJ525ss without charge for parts and labor. Simply send the SBJ525ss (postpaid) and a copy of your sales slip as proof of purchase to: Sonic Alert Inc., 1050 E.
Page 3 INSTRUCTIONS LED ALARM CLOCK WITH BED SHAKER MODEL SBJ525SS Features show on diagram above: AC adpator input Minute Tone Knob 10. Alarm Set / Off Alarm indicator 11. Function Switch PM indicator 12. Volume Knob Flashing LED 13. Vibrator out Jack Time Set 14.
Page 4 Battery Backup – To use the battery backup, you can install a 9-volt alkaline battery in the back of the clock located under the battery cover (14). Battery not included. Note the LED display will not show during power failure but the clock will still be running and keeping proper time until the power is restored. NOTE: For the best results it is recommended that the battery be changed every 6-8 months.