Advertisement
Operating Instructions and Parts Manual
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your tool. Read this manual carefully. Learn the
tool's applications and limitations, as well as potential
hazards specific to it.
2. Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions,
grease, oil, trash, and other debris. DO NOT use this
product in a damp or wet location.
3. Keep children away. All children should be kept away
from the work area. Never let a child handle a tool
without strict adult supervision.
4. DO NOT operate this tool if under the influence of
alcohol or drugs. Read warning labels on prescriptions
to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, DO NOT
attempt to operate.
5. Use safety equipment. Eye protection should be
worn at all times when operating this tool. Use ANSI
approved safety glasses. Everyday eyeglasses are
NOT safety glasses. Dust mask, non-skid safety
shoes, hard hat or hearing protection should be used
in appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-
ties, rings, bracelets or other jewelry may present a
potential hazard when operating this tool. Keep all
apparel clear of the tool.
7. DO NOT overreach. Keep proper footing and balance
at all times when operating this tool.
8. Check for damage. Check your tool regularly. If part of
the tool is damaged, it should be carefully inspected
to make sure that it can perform its intended function
correctly. If in doubt, the part should be repaired. Refer
all servicing to a qualified technician. Consult your
dealer for advice.
9. Keep away from flammables. DO NOT attempt
to operate this tool near flammable materials or
combustibles. Failure to comply may cause serious
injury or death.
10. Store idle tools out of the reach of children and
untrained persons. Tools may be dangerous in the
hands of untrained users.
11. Maintain tools with care.
12. Keep tools dry and clean.
13. Properly maintained tools are less likely to bind and
are easier to control. DO NOT use a damaged tool. Tag
damaged tools "DO NOT use" until repaired.
14. Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the tool's operation.
15. If damaged, have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
16. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may
be suitable for one tool may become hazardous when
used on another tool.
5/17
™
2017 OEMTOOLS
29" STAINLESS STEEL
TEAR DOWN TRAY
17. Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by
unqualified personnel could result in an injury.
18. When servicing a tool, use only identical replacement
parts. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
19. Maintain labels and nameplates on this product. These
carry important information. If unreadable or missing,
contact OEMTOOLS
™
20. Keep this tray dry, clean, and free from brake fluid, oil,
and grease.
21. Before use, read and understand all warnings, safety
precautions, and instructions as outlined in the vehicle
manufacturer's service manual. It is beyond the
scope of this manual to properly describe the correct
procedure and test data for each vehicle.
PRODUCT DESCRIPTION
The OEMTOOLS
29" Stainless Steel Tear Down Tray is
™
an adjustable-height tool tray for transporting tools and
small parts to your workspace.
PRODUCT SPECIFICATIONS
Tray Dimensions:
Product Weight:
Height Range:
Max Capacity at Min Height: 165.35 Lbs. (75 kg)
Max Capacity at Max Height: 110.23 Lbs. (50 kg)
Tray Material:
Tray Lining Insert Material: EVA Custom Fit Foam
SPECIFIC SAFETY INSTRUCTIONS
AND WARNINGS
1. Wear Safety Glasses and Gloves while assembling this
product.
2. DO NOT stand on this product. You may fall causing
bodily injury.
3. DO NOT alter this product.
4. Be careful of sharp edges.
5. Keep the product on a level surface. This product may
become unstable and tip if stored on an unstable surface.
6. DO NOT exceed rated weight capacity. Excessive
weight can cause tray failure and possible injury.
Reference product specs for weight capacity at min
and max height.
7. Keep clothing, jewelry, fingers and extremities away
from the pinch points while assembling or adjusting the
tray height.
2
24634
for a replacement.
29" (L) x 20" (W) x 1.5" (D)
33.29 Lbs.
34" to 47.6"
Stainless Steel
Advertisement
