Related Manuals for WORKSWELL GIS 320
Summary of Contents for WORKSWELL GIS 320
- Page 1 WORKSWELL GIS 320 USER MANUAL FW Version: 1.4.1 Release date: 10 February, 2021 Revision : 210210 EN...
-
Page 2: Table Of Contents
Contents 1. Legal Disclaimer 1.1 Copyright ..........2. - Page 3 9.2 MAVLink ..........10.
- Page 4 20. Maintanance 20.1 Cleaning the GIS 320 Head and Cables .......
-
Page 5: Legal Disclaimer
Workswell s.r.o. will, at its op on, repair or replace any such defec ve product free of charge if, upon inspec on, it proves to be defec ve in material or workmanship and provided that it is returned to Workswell within the said twelve-month period. -
Page 6: Warning And Cau Ons
F). Low temperatures can cause damage to the camera. Do not use the Workswell GIS 320 in environmental condi ons that make condensa on possible (make sure the air is non-condensing) Do not apply solvents or equivalent liquids to the cameras, the cables, or other items. Damage to the items can occur. -
Page 7: Fcc No Ce
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 8: Help And Faq
While looking for a solu on of any technical problem we recommend following these steps: try to find an answer by searching this User Manual contact your dealer contact the Workswell support center at support.workswell.eu Headquarters Revision 210210 EN, 10... -
Page 9: User Informa On
4.3 Updates The primary aim of Workswell s.r.o. company is to supply their products in a way that meets the current needs of its users and at the same me to remove all the weaknesses that were found in their use as quickly as possible. -
Page 10: Revision History
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 11: Introduc On
It can also enhance environmental safety tes ng. This posi ons the Workswell unit as an aid in environmental protec on, as well as in human health and safety efforts. - Page 12 6. INTRODUCTION Workswell GIS 320 is designed in a way which allows control of all of its func ons during the flight. The system has digital inputs, which are fully compa ble with standard RC receivers that support S.BUS. Two channels serve as naviga on bu ons in the menu, the rest are shortcuts for the selected func ons (image capturing, video recording, pale e switching, zoom and others).
-
Page 13: System Assembly
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 14: Hdmi Micro Video Output
The Workswell GIS 320 system is equipped with a standard HDMI micro video output. It can be connected to any wireless video link or a display with HDMI input that supports GIS 320 resolu on. The default GIS 320 resolu on 1280x720 (also called HD or 720p). It is recommended to use a display with 16:9 aspect ra o. -
Page 15: Usb Keyboard
Warning: Do NOT connect GIS 320 to any other powered device (such as PC) through the full size USB port on the rear of GIS 320. As the rear USB port is powered, connec on to another powered USB port can lead to permanent damage to either device. -
Page 16: Sd Card
Warning: Do NOT connect GIS 320 to any other powered device (such as PC) through the full size USB port on the rear of GIS 320 - only the side Micro USB port can be used for mass storage access. As the rear USB port is powered, connec on to another powered USB port can lead to permanent damage to either device. -
Page 17: Turning The System Off
It is not recommended to o en turn on and off the cryogenic cooling on the thermal camera as this might shorten the lifespan of the device. 7.9 Focusing the Infrared Camera The GIS 320 system contains an auto-focusing tool that can be accessed via the camera menu. To focus the camera, navigate to MENU -> FUNCTIONS -> AUTOFOCUS Headquarters... -
Page 18: Moun Ng The System
7. SYSTEM ASSEMBLY 7.10 Moun ng the System The Workswell GIS 320 system can be mounted to a drone using the 1/4-20 UNC thread (one on bo om or one on back side). Headquarters Revision 210210 EN, 10 Feb, 2021... -
Page 19: Input Interfaces
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 20: Digital Inputs
Warning: The +5V wire on the S.BUS input is intended for powering otherwise unpowered transceivers and converters from GIS 320. If your transceiver or convertor is powered otherwise, do NOT connect the +5V wires and leave them unconnected instead, only connec ng the GND and S.BUS pins. If the +5V wires are connected, damage of either device might occur. - Page 21 Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic...
-
Page 22: S.bus Through Amimon Connex
S.BUS Channel GIS 320 IO Table 8.1 – S.BUS Offset example - which S.BUS Channel corresponds to GIS 320 IO 8.1.1 S.BUS through Amimon Connex S.BUS signal from RC transceiver can be sent through Amimon Connex, so there is no need for the receiver. For this, you need the Amimon Connex and RC transceiver with TRAINER support. -
Page 23: S.bus Through Dji Lightbridge
Figure 8.6 – DJI Lightbridge 1 TRAINER cable (le ) and S.BUS cable (right). 8.2 Trigger Signal Aside from the more sophis cated S.BUS control solu on, GIS 320 retains a single basic digital input that can be used for manual capture triggering. -
Page 24: Gps And Mavlink
Warning: The +5V wire on the GPS input is intended for powering otherwise unpowered GPS modules from GIS 320. If your GPS source is powered otherwise, do NOT connect the +5V wires and leave them un- connected instead, only connec ng the GND, TXD and RXD pins. If the +5V wires are connected, damage of either device might occur. -
Page 25: Gps
9.1 GPS The Workswell GIS 320 system is equipped with GPS interface through the unified interface cable with a 4 pin connector. As for the physical layer, the Workswell GIS 320 system is designed for UART with opera ng voltage of 5 V, although it is tolerant to 3.3 V. -
Page 26: Mavlink
Autopilots or any device suppor ng MAVLink messages can be connected to GIS 320 unified interface cable with a 4 pin connector. As for the physical layer, the Workswell GIS 320 system is designed for UART with opera ng voltage of 5 V, although it is tolerant to 3.3 V. - Page 27 MAV_CMD_VIDEO_START_CAPTURE MAV_CMD_VIDEO_STOP_CAPTURE To connect an autopilot to GIS 320, please do the following: 1. Set your autopilot to send messages and commands with UART at 57600 bps 2. Crimp the autopilot cables and insert them into the empty Molex connector 3.
-
Page 28: Dji Drones And Can Bus
WORKSWELL GIS 320 comes with a cable for connec ng the system to DJI CAN Bus on M600 drone with Ronin gimball. GIS 320 can read the DJI GPS coordinates from the CAN bus, so there is no need for external GPS. It can also be controlled with DJI Lightbridge 2 controller. - Page 29 4 - Wheel In the Menu Move Up or Down 4 - Bu on Enter or Open Menu Table 10.1 – GIS 320 func ons assigned to the RC controller. Headquarters Revision 210210 EN, 10 Feb, 2021 E-mail and Web...
-
Page 30: Digital Output
11. DIGITAL OUTPUT Digital Output WORKSWELL GIS 320 has op nal digital output feature. This is a replacement for CAN interface and it must be specified during the order, synce it needs different hardware. The digital output uses the CANH and CANL wire. The CANH wire is changed to signal and CANL is changed to GND. -
Page 31: System Appearance
System Appearance The Workswell GIS 320 system will automa cally start within seconds of the power supply being provided. A er that, you need to turn on the power bu on on the top of the camera to start the cryogenic cooling of the infra red camera. - Page 32 Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic...
- Page 33 Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic...
-
Page 34: Layouts
12.1.1 Inspec on The INSPECTION layout is the GIS 320’s default. It is designed for inspec on and measurement uses in mind. The surface area of screens from cameras is the smallest and the saved space is used for presenta on of system status and measured data. - Page 35 Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic...
-
Page 36: Main Menu (Se Ngs)
13.1 General Descrip on The Workswell GIS 320 system offers many customiza on op ons. All the configura on can be done using the MAIN MENU. It can be opened by moving the joys ck to the right side (if connected to an RC transmi er as recommended) or by pressing ENTER bu on (if standard USB keyboard is connected). -
Page 37: Range
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... - Page 38 Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic...
-
Page 39: Func Ons
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... - Page 40 Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic...
-
Page 41: Capture
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 42: Pale E
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 43: Measure
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... - Page 44 Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic...
-
Page 45: Advanced
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 46: Thermal Camera
DEFAULT - Op on to reset all the items above to their default values. Note: The Lens op on only appears in the menu in case the GIS 320 camera has been calibrated for use with mul ple exchangeable thermal lenses. -
Page 47: Visible Camera
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... - Page 48 Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic...
-
Page 49: Layout
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... - Page 50 Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic...
-
Page 51: Images & Video
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 52: Alarms
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... - Page 53 • It will shi S.Bus IO inputs by selected number as described in table 8.1 • For example, S.Bus Offset = 5 will make the S.Bus input IO 6 act as GIS 320 IO 1 TRIGGER - Behavior binding of the digital trigger (Capture Image, toggle Record or trigger shu er correc on...
-
Page 54: Memory
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 55: System
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 56: Info
13.7.9 Info INFO category displays informa on about system such as firmware version, serial number (needed for com- munica on with Workswell), ar cle number, device temperature and informa on about the Workswell s.r.o. company. Figure 13.17 – Info menu. -
Page 57: Images And Video
14. IMAGES AND VIDEO Images and Video WORKSWELL GIS 320 allows the user to capture and record several image and video formats. The user is advised to save only the desired formats, since each image or video format have performance and memory requirements that add up. -
Page 58: Visible
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 59: Data Transfer And Memory Manipula On
Data Transfer and Memory Manipula on Workswell GIS 320 system is equipped with internal SSD storage for captured images and recorded video. This storage can be further extended and copied from using an op onal SD Card and a Flash Drive. - Page 60 Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic...
-
Page 61: Forma Ng Memory
Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic... -
Page 62: Mass Storage (Usb Otg)
15. DATA TRANSFER AND MEMORY MANIPULATION 15.2 Mass Storage (USB OTG) GIS 320 can be connected directly to PC or Mac with Micro USB cable and act as a Mass Storage. Thus the data from connected memory can be accessed, copied, moved or deleted. -
Page 63: Firmware Update
Firmware Update Workswell GIS 320 system is supplied with the latest firmware. As me goes on, newer firmware could appear in order to bring the user new func ons, improve the old ones or fix bugs. For this purpose, the system allows the user to update the firmware. - Page 64 Workswell ThermoLab 17.1 General Descrip on The Workswell GIS 320 system can capture radiometric images and record radiometric video compa ble with Workswell ThermoLab (supplied with Workswell GIS 320 system). Workswell ThermoLab offers the user many func ons for edi ng and processing radiometric images and videos.
- Page 65 18. ENVIRONMENTAL CONDITIONS Environmental Condi ons 18.1 Environmental Condi ons You should follow these storage and opera ng condi ons for proper func on of the Workswell GIS 320 system: ◦ ◦ Opera on temperature range from -10 C to +50 ◦...
- Page 66 Non-uniformity correc on (NUC) or shu er calibra on. The GIS 320 camera does not have internal shu er and the NUC needs to be performed manually. To perform the NUC please cover the lens with the original plas c cap and navigate to MENU -> CAPTURE -> IMAGE CORRECTION (NUC).
- Page 67 20. MAINTANANCE Maintanance 20.1 Cleaning the GIS 320 Head and Cables Liquids: Use one of these liquids: Warm water op onally with a weak detergent solu on Equipment: A so cloth Procedure: 1. Soak the cloth in the liquid. 2. Twist the cloth to remove excess liquid.
- Page 68 Revision 210210 EN, 10 Feb, 2021 E-mail and Web Mobile: U Albrechtova vrchu 12 Reg. No.: 29048575 All pictures are only for illustra on. info@workswell.eu +420 725 877 063 155 00, Prague 13 Real values may vary. www.workswell.eu VAT No.: CZ29048575 Czech Republic...
- Page 69 21.2 Reset bu on On side of the GIS 320 device, a reset bu on is present. This bu on has two func ons. If the reset bu on is held down during device startup, the device should go directly into Safe Mode as described in the next sec on.
- Page 70 • Please, send these log files to Workswell support center with informa on about the issue. In the case none of the first three op ons help resolve the issue, please contact the Workswell at support.workswell.eu and report the problem, supplying the system logs saved through the fourth op on.
- Page 71 21.4 Reset to Factory Default You can reset the GIS 320 to its factory default state with the pin bu on. Press the pin bu on for more then 5 seconds. The LED should start blinking rapidly. Do not unplug the GIS 320 from power source during this process! Factory default can help in some situa ons.
- Page 72 Contacts Sales Department Headquarters Partners Worldwide Mobile: +420 725 955 464 Workswell s.r.o. Visit our partner list online E-mail: sales@workswell.eu U Albrechtova vrchu 12 155 00, Prague 13 Czech Republic Company contact details Mobile: +420 725 877 063 E-mail: info@workswell.eu...
Need help?
Do you have a question about the GIS 320 and is the answer not in the manual?
Questions and answers