Do you have a question about the iSi-HM-AL-690 and is the answer not in the manual?
Questions and answers
Summary of Contents for iSi iSi-HM-AL-690
Page 1
Installation Guide Extreme Duty Adjustable H-Mount for Caravans and Camper Trailers iSi-HM-AL-(690, 810, 910) Thank you for your purchase of the iSi Extreme Duty Adjustable H-Mount®. The bolt-on iSi adjustable H-Mount is an incredibly strong mount that braces drawbar arms...
Page 2
Determine the ideal position of the H-Mount (Item 1) on the drawbar and place the H- Mount (item 1) onto the drawbar. Hint: You will be able to fine tune the position later. Install U-bolts from underneath the drawbar arms and pass through the shorter slots in the Foot Bracket (item 2).
Page 3
Fine-tune the position of the H-Mount to ensure that the mount is square and set at the ideal position on the drawbar. When set, nip up the M10 bolts (Item 7). Ensure that the U-bolts (Item 3) are vertical. Then nip up U-bolt nuts (Item 4).
Page 4
The heart of an extreme duty bicycle carrier drawbar solution is the bolt-on iSi adjustable H-Mount. An incredibly strong mount that braces the drawbar arms and spreads the load over a wide area. This eliminates pressure hot spots and is inherently stronger and more rigid than welded cross-tube solutions.
Need help?
Do you have a question about the iSi-HM-AL-690 and is the answer not in the manual?
Questions and answers