INSTALLATION
①
②
③
①
Install the transmitter as demonstrated.
②
Vertical Installation: Secure the cold shoe with 1/4 screw hole at the bottom of
the transmitter and mount it to the camera.
Horizontal Installation: Connect the expansion accessary to the transmitter's
mounting hole and secure the cold shoe with hole at the expansion accessary.
Then install them on the camera.
③
Connect the HDMI input of the transmitter with camera's by HDMI cable.
④
Connect to a power supply (Compatible with NP-F970 or the same series of
batteries).
⑤
Turn on the device.
④
⑤
5
ON