Samsung SyncMaster 403T User Manual page 36

Multiple Display Control (MDC)
3. Beginning – Main Screen
1. Use the main icons to switch into each screen.
2. Click Select all or Clear to select or clear all displays.
3. Select a display from Display Selection.
4. Use Grid to view brief information on selected display.
5. Use Control Tools to control displays.
6. Allows you to enable or disable the remote control signal receiving function of the display unit.
7. The current title to be controlled is displayed.
8. Indicates the communication status between the MDC and the display.
Shows "Busy" while communicating and "Idle" when the communication is off.
<Note> The remote control Enable/Disable function operates whether or not the power is On/Off, and
Click Start > Program > Multiple Display Control to start the program.
Select a set to see the volume of the selected set within the slider.
Main Icons
Select Button
Display Selection
Info Grid
this applies to all displays connected to the displays connected to the MDC However,
regardless of the status at the time the MDC is shut down, the remote control signal receiving
function of all displays is initialized to Enable when the MDC is closed.
Control Tools
Remocon
Title
Comm. Status