Table of Contents
Advertisement
Quick Links
KeyPad is a wireless indoor touch-sensitive keyboard for managing the Ajax
security system. Designed for indoor use. With this device, the user can arm and
disarm the system and see its security status. KeyPad is protected against
attempts to guess the passcode and can raise a silent alarm when the passcode is
entered under duress.
Connecting to the Ajax security system via a secured
KeyPad communicates with the
KeyPad operates with Ajax hubs only and does not support connecting via
uartBridge
integration modules.
The device is set up via the
KeyPad User Manual
Updated January 4, 2021
hub
at a distance of up to 1,700 m in line of sight.
Ajax apps
for iOS, Android, macOS, and Windows.
Jeweller
radio protocol,
ocBridge Plus
or
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for AJAX Systems KeyPad
- Page 1 Designed for indoor use. With this device, the user can arm and disarm the system and see its security status. KeyPad is protected against attempts to guess the passcode and can raise a silent alarm when the passcode is entered under duress.
-
Page 2: Functional Elements
Buy keypad KeyPad Functional elements 1. Armed mode indicator 2. Disarmed mode indicator 3. Night mode indicator 4. Malfunction indicator 5. The block of numerical buttons . “Clear” button 7. “Function” button . “Arm” button 9. “Disarm” button 10. “Night mode” button 11. -
Page 3: Operating Principle
If the battery is low, the backlight switches on at a minimum level, regardless of the settings. If you do not touch the keyboard for 4 seconds, KeyPad dims the backlight, and after another 12 seconds, the device switches to the sleep mode. - Page 4 KeyPad can notify a security company of the system being disarmed by force. The Duress Code — unlike the panic button — does not activate sirens. KeyPad and the app notify of successful disarming the system, but the security company receives an alarm.
- Page 5 After arming/disarming the system, the malfunction indicator blinks smoothly. The keyboard is locked while the indicator blinks. Low battery When activating KeyPad with low batteries, it will beep with a long sound signal, the malfunction indicator smoothly lights up and then switches off.
-
Page 6: Selecting The Location
3. Select Add — the countdown will begin. 4. Switch on KeyPad by holding power button for 3 seconds — it will blink once with the keyboard backlight. For detection and pairing to occur, KeyPad should be located within the coverage of the wireless network of the hub (at the same protected object). - Page 7 If the device has low or unstable signal strength even after moving, use a ReX radio signal range extender KeyPad is designed for operation when fixed to the vertical surface. When using KeyPad in hands, we cannot guarantee successful operation of the sensor keyboard.
- Page 8 Value Temperature of the device. Measured on the Temperature processor and changes gradually Jeweller Signal Strength Signal strength between the hub and KeyPad Battery level of the device. Two states available: ОК Battery discharged Battery Charge How battery charge is displayed in...
- Page 9 Value First field Device name, can be edited Selecting the virtual room to which the device is Room assigned Selecting the security group to which KeyPad is Arming/Disarming Permissions assigned Selecting the way of verification for arming/disarming Keypad code only...
- Page 10 Opens the KeyPad User Manual Disconnects the device from the hub and deletes Unpair Device its settings KeyPad allows to set both general and personal passcodes for each user. To install a personal passcode: 1. Go to profile settings (Hub Settings Users Your profile settings)
- Page 11 ID. To manage the arming mode of this group, entering a common or personal password is sufficient. Please note that if a group is assigned to the KeyPad, you will not be able to manage Night mode using a common password.
- Page 12 What is Group ID? What is User ID? If a group is assigned to the KeyPad (Arming / Disarming permission field in the keypad settings), you do not need to enter the group ID. To manage the arming mode of this group, entering a personal password is sufficient.
- Page 13 4422 How the fire alarm muting function works Using the KeyPad, you can mute the fire alarm by pressing the Function button (if the corresponding setting is enabled). The reaction of the system to pressing a button depends on the settings and the state of the system: Interconnected FireProtect Alarms are disabled —...
-
Page 14: Functionality Testing
The double-sided adhesive tape may be only used for temporary attachment of KeyPad. The tape will run dry in course of time, which may result in the falling of the KeyPad and damage of the device. -
Page 15: Complete Set
As soon as the KeyPad is fixed in SmartBracket, it will blink with the LED X (Fault) — this will be a signal that the tamper has been actuated. If the malfunction indicator X did not blink after installation in SmartBracket, check... -
Page 16: Warranty
EN 50131-1, EN 50131-3, EN 50131-5-3 Warranty Warranty for the “AJAX SYSTEMS MANUFACTURING” LIMITED LIABILITY COMPANY products is valid for 2 years after the purchase and does not apply to the pre-installed battery. If the device does not work correctly, you should first contact the support service —... - Page 17 The full text of the warranty User Agreement Technical support: support@ajax.systems...
Need help?
Do you have a question about the KeyPad and is the answer not in the manual?
Questions and answers