Advertisement
Quick Links
Advertisement
Related Manuals for Bartscher W10-KB Plus
Summary of Contents for Bartscher W10-KB Plus
- Page 1 W10-KB Plus 401621 Original-Gebrauchsanleitung V1/0917...
-
Page 2: Technical Data
GB/UK Technical data Name Hand wash basin W10-KB Plus 401621 Code no.: Material: Chrome nickel steel Wall-mounted With soap dispenser With knee operation Water dispensed via knee operation: approx. 15 seconds Realization: Cold and/or hot water connection 1/2”... -
Page 3: Delivery Range
Delivery range Unpack the device and remove all package materials according to the valid environment protection regulations. Ensure that all parts are present: - 1 x hand wash basin - 1 x swivel fitting - 1 x soap dispenser - 1 x knee fitting - 1 x mixer fitting - 1 x siphon... - Page 4 2. Install the supplied swivel fitting (1) on the right back edge of the hand wash basin (4) (rys. 2). 3. To do so, unscrew the plastic nuts (2) from the underside of the swivel fitting (1) and remove the washers. 4.
- Page 5 Install the cold and/or water mixer fitting / knee operated fitting 8. Open up the front cover plate (5) of the hand wash basin. 9. Mount the mixer fitting (12) to the thread (6) of the knee operated fitting (10) (fig. 3). 10.
- Page 6 Mount the hand wash basin Hang the hand wash basin near the water supply. Before mounting the hand wash basin, check the parameters of the wall where the basin is to be installed. The wall should be able to support the weight of the hand wash basin.
- Page 7 15 seconds. After that time the water flow is automatically stopped. Cleaning Clean the hand wash basin regularly with a soft cloth and non-abrasive cleaner. Bartscher GmbH Franz-Kleine-Str. 28 33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax:...