Download Print this page

Atmel AT88SC-DK1 Welcome And Quick Start Manual

Download this manual

AT88SC-DK1 WELCOME AND QUICK START GUIDE

Dear Valued Customer,

Thank you for choosing CryptoMemory

for your security needs.

As you may

already know, CryptoMemory provides low-cost powerful security for your product

authentication and secure data storage needs.

To ensure you have the most

current information, we ask that you check the CryptoMemory product website at

www.atmel.com/products/SecureMem for any recent updates.

We wish you an

exciting development experience and ask that you do not hesitate to contact us at

cryptomemory@atmel.com for any assistance we can provide.

Best regards,

Your Atmel CryptoMemory Team

Arrow.com.

Downloaded from

Need help?

Do you have a question about the AT88SC-DK1 and is the answer not in the manual?

Page 1 AT88SC-DK1 WELCOME AND QUICK START GUIDE Dear Valued Customer, Thank you for choosing CryptoMemory for your security needs. As you may ® already know, CryptoMemory provides low-cost powerful security for your product authentication and secure data storage needs. To ensure you have the most current information, we ask that you check the CryptoMemory product website at www.atmel.com/products/SecureMem for any recent updates.
Page 2 1 header pin for power, VCC. 1 header pin for ground, GND. ÏÏÏÏ Software Setup 1. Install contents of AT88SC-DK1 CD into your PC 2. Check the README file for information on CryptoMemory Library Integration and Reference. Arrow.com. Arrow.com. Downloaded from...
Page 3 ÏÏÏÏ Hardware Setup STEP 1: STEP 2: STEP 3: Insert a CryptoMemory device into Connect Power and Ground wires Connect Clock and Data wires the SOIC socket Use Black-Red patch cord Use Green-Yellow patch cord Align PIN 0 of the SOIC package towards the header-pins side of the adaptor board.
Page 4 ÏÏÏÏ Troubleshooting 1. Make sure CryptoMemory is properly inserted and aligned in the SOIC socket. The correct orientation places PIN 0 of the SOIC package towards the adaptor board header pins. When correctly oriented, holding the adaptor board with header pins towards self should present the marking texts on the CryptoMemory package right side up.