1. Manuals
  2. Brands
  3. Chandler Manuals
  4. Farm Equipment
  5. 10 PTT-FT
  6. Manual

Chandler 10 PTT-FT Manual

Fertilizer and lime spreader
Hide thumbs
Table of Contents

Advertisement

Quick Links

Model 10 PTT-FT &
20 PTT-FT
Fertilizer and Lime Spreader
SERIAL # __________________
WORK ORDER # ___________

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 10 PTT-FT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Chandler 10 PTT-FT

  • Page 1 Model 10 PTT-FT & 20 PTT-FT Fertilizer and Lime Spreader SERIAL # __________________ WORK ORDER # ___________...

  • Page 2: Table Of Contents

    Table of Contents Chandler Equipment Co. Personnel…………Page 1 Warranty Information……………………….Page 2 – Page 4 Raven Industries Warranty…………………Page 5 Safety Safety Labels Page S-1 Safety Precautions Page S-2 Safety Decals Page S-3 Safety Decals Page S-4 Safety Decals Page S-5 Safety Decals...
  • Page 3 PTO Drive Spinners - Parts List Page 2-3 Press Wheel Drive - PTO Drive Spinners Page 2-4 Press Wheel Drive - PTO Drive Spinners - Parts List Page 2-5 Press Wheel Drive - PTO Drive Spinners - Parts List Page 2-6 Hydraulic Cylinder Engagement Assembly &...
  • Page 4 Hooking up Hydraulic Spinner to Tractor Remotes Page 4-8 Checking Spinner Rotation Page 4-9 Setting Spinner Speed Page 4-10 Section 5 Self Contained Hydraulic with Press Wheel Self Contained Hydraulic w/ Press Wheel - Hydraulic Diagram Page 5-1 Self Contained Hydraulic w/ Press Wheel - Hydraulic Parts List Page 5-2 Hydraulic Filter Page 5-3...
  • Page 5 Rate Chart – 20” Mesh Chain Page 7-6 Rate Chart – 24” Mesh Chain Page 7-7 Section 8 Plug to Tractor Hydraulics for Rate Control System Plug to Tractor Hydraulics - Hydraulic Diagram Page 8-1 Plug to Tractor Hydraulics - Parts List Page 8-2 Warning! Page 8-3...
  • Page 6 Rawson Tandem Motor Gear Case - Parts List Page 10-8 Rawson Tandem Motor Gear Case w/ Sensor Port - Parts Breakdown Page 10-9 Rawson Tandem Motor Gear Case w/ Sensor Port - Parts List Page 10-10 Hydraulic Filter Page 10-11 Conveyor Motor Page 10-12 Section 11 Basic Set-Up and Operation...
  • Page 7 Spread Pattern Adjustment Page 14-1 Spread Pattern Adjustment - Spinners and Flow Divider Page 14-2 Spread Pattern Adjustment - Preparation and Procedure Page 14-3 Spread Pattern Adjustment - Data Recording Page 14-4 Spread Pattern Adjustment - Data Recording Page 14-5 Spread Pattern Adjustment - Data Recording and Driving Methods Page 14-6 Acceptable Spread Patterns...

  • Page 8: Chandler Equipment Co. Personnel

    Chandler Equipment Company Personnel Bill Chandler Chief Executive Officer Advertising & Marketing Dealer / Distributor Arrangements Brannon Chandler General Manager Production & Scheduling Warranty, Sales and Service Andrea Thompson Administrative Assistant Lisa Johnson Accounts Receivable Collections Michael Sosebee Sales Manager...
  • Page 9 (Warranty period is on equipment built after July 1, 2012) B) Warranty Approval: a. Any and All warranty claims must be approved in writing by Chandler Equipment Company prior to any work being done. b. ANY WORK DONE WITHOUT PRIOR WRITTEN APPROVAL WILL NOT BE COVERED UNDER WARRANTY AND THE CUSTOMER / DEALER WILL BE RESPONSIBLE FOR ALL COST.
  • Page 10 Chandler Equipment shall NOT warranty any part or parts replaced by the Customer/Dealer that are not Chandler Genuine Parts. b. Cost of any part or parts that are replaced by the Customer / Dealer that are not Chandler Genuine Parts shall be the sole responsibility of the Customer / Dealer.
  • Page 11 Chandler Equipment accepts no responsibility or liability of any kind due to improper installation of equipment or parts on any product manufactured by Chandler Equipment Company. This includes, but is not limited to, any damages to personal property, crops, or any other equipment.

  • Page 12: Raven Industries Warranty

    All Raven Industries parts must be returned clean and free of any fluids. It is recommended that the defective parts be returned to Chandler Spreaders, Inc. in the packaging that the replacements parts came in.

  • Page 13: Safety

    Fertilizer and Lime Spreader Safety...

  • Page 14: Safety Labels

    SAFETY LABELS Your safety and the safety of those around you are very important to us here at Chandler Equipment Co. Therefore we have provided important safety labels throughout this manual. A safety label alerts you of potential hazards that can injure you or others.

  • Page 15: Safety Precautions

    Safety Precautions 1) Be sure all guards or other safety devices, and decals are in place and functioning properly. 2) Stay away from moving parts when spreader is in operation. 3) Check lug nuts daily. 4) Maintain proper tire pressure, according tire manufacturers specifications.

  • Page 16: Safety Decals

    Safety Decals WARNING!  DO NOT ADJUST UNTIL SPINNERS STOP MOVING  STAY OUT OF BOX WHILE CONVEYOR IS IN MOTION  DO NOT RIDE ON SPREADER WHILE VEHICLE IS IN MOTION  STAY CLEAR OF SPINNERS WHILE SPINNERS ARE IN MOTION THINK SAFETY! S - 3...
  • Page 17 PTO SAFETY DECAL S - 4...
  • Page 18 CAUTION! MAKE SURE TO CHECK LUG NUTS DAILY LUG NUT DECAL MAXIMUM LOADED SPEED WARNING! DO NOT EXCEED 25 MPH S - 5...
  • Page 19 HYDRAULIC SYSTEM DECAL S - 6...
  • Page 20 ROTATING CHAIN WARNING ROTATING SPINNERS WARNING S - 7...

  • Page 21: Pto Shaft Adjustment And Maintenance

    PTO Shaft Adjustment Maintenance...

  • Page 22: How To Shorten The Pto Shaft

    IMPORTANT The following section contains important information regarding the safety and operation of PTO drive equipment. As our spreaders are sold throughout the world we install a standard length PTO shaft to accommodate multiple types and brands of tractors. Therefore, modification (i.e. shortening) of the shaft may be required to meet the specific needs of your tractor.
  • Page 23 9) Attach the driveline to the tractor PTO and implement PIC. Make sure each end is firmly attached to its respective shaft. Make sure driveline does not bottom out when the implement is fully raised, and that at least 1/3 of the tube is engaged when the implement is at its lowest height.

  • Page 24: Section 1 Basic Information

    Section 1 Basic Information...
  • Page 25 10 PTT-FT 1 - 1...
  • Page 26 20PTT-FT 1 - 2...
  • Page 27 10 PTT-FT & 20PTT-FT Capacities 45° Sides Hopper Capacity Struck Level Heaped 10 PTT-FT 156 Cubic Ft. 186 Cubic Ft. 20 PTT-FT 245 Cubic Ft. 275 Cubic Ft. Payload Fertilizer @ 65 # Lime @ 90 # 10 PTT-FT 10,140 Lbs.

  • Page 28: Section 2 Pto Drive Spinners

    Section 2 PTO Drive Spinners...
  • Page 29 PTO DRIVEN SPINNERS BASIC PARTS ILLUSTRATION 2 - 1...

  • Page 30: Pto Drive Spinners Parts List

    PTO Drive Spinners Parts List Ref. Part Number Description 200-2-018A 48" PTO Telescoping Shaft 300-FL-126 11" Shaft for Pulley UCP-207-20 1-1/4" Pillow Block Bearing 1100-1-107 B-67 V-Belts (540 PTO) 1100-1-111 B-69 V-Belts (1000 PTO) PTF-13 Retaining Ring 1100-2-202 2 B - 5.6 SDS Pulley (540 PTO) 1100-2-215 1-1/4"...
  • Page 31 300-FL-102-L 24" Spinner Disc (Only) S.S. (L.H.) 300-FL-101-R 24" Spinner Disc (Only) 7 Ga. Mild Steel (R.H.) 300-FL-102-R 24" Spinner Disc (Only) S.S. (R.H.) 300-1-208 Spacer - Lock Collar for 1-1/4" Shaft UCF-207-20 1-1/4" 4 Bolt Flange Bearing 200-1-199A Universal Joint 1-1/4” R, ¼” K 300-1-126 Front Belt Guard (540 PTO) 300-1-126...
  • Page 32 2 - 4...
  • Page 33 Press Wheel Drive – PTO Drive Spinners Parts List Ref. Part Number Description UCP-207-20 1-1/4" Pillow Block Bearing UCP-208-24 1-1/2" Pillow Block Bearing 300-FL-101-L 24" Spinner Disc (Only) 7 Ga. Mild Steel (L.H.) 300-FL-102-L 24" Spinner Disc (Only) S.S. (L.H.) 300-FL-101-R 24"...
  • Page 34 500-3-301 16" S.S. Mesh Chain 500-3-303 20" S.S. Mesh Chain 500-3-304 24" S.S. Mesh Chain 500-3-306 16" S.S. Connecting Pin 500-3-308 20" S.S. Connecting Pin 500-3-309 24" S.S. Connecting Pin 1100-2-201 2 B - 4.4 SH Pulley 1100-2-214 SH – 1-1/4” Bushing 1100-2-202 2 B - 5.6 SDS Pulley 1100-2-215...
  • Page 35 2 - 7...
  • Page 36 2 - 8...
  • Page 37 Section 3 Press Wheel for Plug to Tractor Hydraulic Spinners...
  • Page 38 Before hooking up hydraulic spinner option to tractor carefully read the operations and parts manual. If you are not certain of which system you have contact Chandler Equipment or our local dealer. Turn Ball Valve OFF for Closed System Turn Ball Valve ON...
  • Page 39 Hydraulic Spinners – Plug to Tractor Parts List Part # Description A) 400-1-313 Flow Control Valve with Built-in Relief Ball Valve – ½” 3000psi B) 400-1-323 C) 400-C-201 M - 30 2" Gear Spinner Motor D) 400-1-316 LT-50 Check Valve E) 400-1-316A HSP-1000-6-5 Check Valve 3 - 2...
  • Page 40 3 - 3...
  • Page 41 Press Wheel Drive – Hydraulic Drive Spinners Parts List Ref. Part Number Description UCP-207-20 1-1/4" Pillow Block Bearing UCP-208-24 1-1/2" Pillow Block Bearing UCF-208-24 1-1/2" 4 Bolt Flange Bearing 700-1-103 60 BS 11 X 1-1/4" Sprocket 700-1-108 60 BS 26 X 1-1/4" Sprocket 700-1-112 60 BS 45 X 1-1/4"...
  • Page 42 300-FL-108-L F/L Spinner Blade Heat Treated (L.H.) 300-FL-109-L F/L Spinner Blade S.S. (L.H.) 300-FL-107-R F/L Spinner Blade Mild Steel (R.H.) 300-FL-108-R F/L Spinner Blade Heat Treated (R.H) 300-FL-109-R F/L Spinner Blade S.S. (R.H.) 300-FT-002C S-1 1/4" GW Shaft 17" 300-FT-002A L-1 1/4"...
  • Page 43 3 - 6...
  • Page 44 Section 4 Hydraulic Spinners...
  • Page 45 4 - 1...
  • Page 46 Hydraulic Spinners – Parts List Ref. Part Number Description 400-C-201 M-30 - 2" Gear Spinner Motor 300-1-210 Spinner Shaft - Carbon M30 (Specify Length) 300-1-211 Spinner Shaft - Stainless M30 (Specify Length) 300-FL-112 4 Bolt Spinner Hub - Carbon 300-FL-112A 4 Bolt Spinner Hub - Stainless 300-FL-101-L 24"...
  • Page 47 Spinner Motor M-30 – 2 Assembly Parts M-30 Motor Parts List Assembly Parts Description Description Part # 1A) GREASE SEAL M-30 - 2 Motor 400-C-201 1) SNAP RING M-30 Seal Kit (includes1A, 3, 10) 400-C-206 2) BEARING SPACER 1A) GREASE SEAL 400-C-215 3) MOTOR SHAFT SEAL 3) MOTOR SHAFT SEAL...
  • Page 48 Note: Never bottom out adjustment screw this could 4 - 4...
  • Page 49 4 - 5...
  • Page 50 C) Turn adjustable screw on half turn, and then check pressure setting as outlined above. D) Continue this procedure until pressure gauge reads 2000 PSI. NOTE: If unable to obtain 2000 PSI contact your local dealer or Chandler Equipment Service Department at 1-800-243-3319 NOTE OPEN CENTER...
  • Page 51 To avoid damage to Tractor or Chandler Spreader use following procedure when hooking up the hydraulic spinner option to the tractors hydraulic system. Hydraulic System Pumps: Today’s tractors are equipped with either Constant Displacement or Variable Displacement Hydraulic Pumps. Constant Displacement Pumps put out a constant flow regardless of pressure (until the relief valve bypasses the flow).

  • Page 52: Hooking Up Hydraulic Spinner To Tractor Remotes

    Hooking up Hydraulic Spinner Option to Tractor Remotes When hooking up Hydraulic Spinner Option use the following procedure. Connect Pressure Hose to tractor remote using coupler marked for the Lower Position. (Symbol indicates Lower Position) This will turn the spinners in proper direction when lever is in the Lower position. If tractor is equipped with hydraulic motor return option (low pressure return circuit) Connect Return Line here Connect Return Hose to tractor remote using coupler marked for the Raise Position.
  • Page 53 If you are not certain how to hookup the pressure and return line contact Chandler Equipment Co. or your local dealer. NOTE: All Chandler Spreaders with the hydraulic spinner option will run with an Open or Closed System.
  • Page 54 (Such as with lime spinner speed may need to be turned up to 750 – 800 RPM, lighter materials may need slower spinner speed) If you have any questions on spinner speed contact Chandler Equipment Co. or your local dealer.
  • Page 55 Section 5 Self Contained Hydraulic with Hydraulic Spinners and Press Wheel Drive Conveyor...
  • Page 56 9 PT – FT Hydraulic System – Self Contained w/ Press Wheel 5 - 1...
  • Page 57 Prince Single Pump (540 PTO) – HC-PTO-2A A) 400-R-115 B) 400-1-306 MV-4 Control Valve w/ Lock C) 400-1-313 Flow Control Valve with Built-in Relief D) 400-C-201 M - 30 2" Gear Spinner Motor Hydraulic Cylinder – 2.5” x 4” E) 400-1-305 F) 400-1-319A Filter Head 400-1-319...

  • Page 58: Hydraulic Filter

    Hydraulic Filter 1) Filter Element 400-1-319 2) Filter Head 400-1-319A (when ordering this part # items 3,4 are included 5 - 3...

  • Page 59: Checking Hydraulic Pressure

    C) Turn adjustable screw on half turn, and then check pressure setting as outlined above. D) Continue this procedure until pressure gauge reads 2000 PSI. NOTE: If unable to obtain 2000 PSI contact your local dealer or Chandler Equipment Service Department at 1-800-243-3319 5 - 4...
  • Page 60 Section 6 Axle Assembly...
  • Page 61 7,000# Torsion Axle Ref. Part Description Part Number 7000 # Axle Assembly Complete (Standard) 800-2-119 6 Bolt Hub Assy. 800-2-104 Spindle 800-2-115 Hub Only 800-2-103 Wheel Stud 800-2-118 Wheel Nut 800-2-117 Hub Cap 800-2-107 Cotter Pin 800-2-102 Slotted Nut 800-2-114 Washer 800-2-116 Outer Cone (LM-67048)
  • Page 62 10,000# Torsion Axle Ref. Part Description Part Number 10000 # Axle Assembly Complete (Standard) 800-3-116 8 Bolt Hub Assy. 800-3-102 Spindle 800-3-111 8 Bolt Hub Only 800-3-101 Wheel Stud 800-3-114 Wheel Nut 800-3-113 Hub Cap 800-3-103 Cotter Pin 800-3-115 Spindle Nut 800-3-109 Washer 800-3-112...
  • Page 63 Tire and Wheel Combinations Bolt Air Pressure Tire and Wheel Axle Pattern Tire Size Wheel Size (psi) Tire Part # Wheel Part # Part # 7000 # 12.5L x 15 15 x 10 LB 800-1-101 800-1-109 800-1-119 7000 # 14L x 16.1 16.1 x 11 C 800-1-102 800-1-110...
  • Page 64 Section 7 Basic Set-Up & Operation...

  • Page 65: Basic Operation Of A Pull Type Spreader

    Basic Operation of a Pull Type Spreader 1) Make sure that flow control valve is adjusted properly for spinner speed. 2) Raise gate for desired rate of application. 3) Adjust material divider accordingly. 4) Engage Hydraulic Remote/PTO control, once engaged, spinners should begin turning.

  • Page 66: Setting Spinner Speed - Hydraulic Spinners Only

    Setting Spinner Speed – Hydraulic Spinners Only We recommend a spinner speed of 650–700 RPM as this unit is designed for a 50ft. spread pattern for fertilizer and a 30ft. pattern for lime. This spreader is equipped with a flow control valve to adjust spinner speed and to maintain a constant speed after your tractor reaches proper PTO RPM’s.
  • Page 67 NOTE: These are recommended settings and will vary according to material weight. NOTE: When spreading Lime, remove the rear section of the material divider. NOTE: Chandler Equipment Co. recommends each spreader to be tested, using a pan test kit, every season to ensure proper spread pattern.
  • Page 68 Flow Divider Assembly Overhead View 7 - 4...

  • Page 69: Rate Chart - 16" Mesh Chain

    Rate Chart – 16” Mesh Chain 7 - 5...
  • Page 70 Rate Chart – 20” Mesh Chain 7 - 6...
  • Page 71 Rate Chart – 24” Mesh Chain 7 - 7...
  • Page 72 Section 8 Plug to Tractor Hydraulics for Control System...
  • Page 73 Before hooking up hydraulic spinner option to tractor carefully read the operations and parts manual. If you are not certain of which system you have contact Chandler Equipment or our local dealer. Line with arrows - Pressure Dash Line - Return...
  • Page 74 Part # Description A) 400-1-313 Flow Control Valve with Built-in Relief B) Options: Control Valve 063-0171-846 Raven: 30 GPM PWM 063-0172-194 Raven: 30 GPM Fast Valve 35-02128 TeeJet: 30 GPM EXR - 4 Ball Valve – ½” 3000psi C) 400-1-323 D) 400-R-106 Parker - MB - 18 - Single Rawson Drive 400-R-104...
  • Page 75 To avoid damage to Tractor or Chandler Spreader use following procedure when hooking up the hydraulic spinner option to the tractors hydraulic system. Hydraulic System Pumps: Today’s tractors are equipped with either Constant Displacement or Variable Displacement Hydraulic Pumps. Constant Displacement Pumps put out a constant flow regardless of pressure (until the relief valve bypasses the flow).
  • Page 76 Section 9 Self Contained Hydraulic System...
  • Page 77 9 - 1...
  • Page 78 10 & 20 PTT – FT Hydraulic System – Self Contained Part # Description A) 400-C-209B P - 2500 Tandem Pump 2 1/2" x 2 1/2" (540 PTO) 400-C-209 P - 2500 Tandem Pump 1 1/2" x 1 1/2" (1000 PTO) B) 400-1-308 Relief Valve - Nonadjustable - 2500 PSI (RD-25E) C) 400-1-313...
  • Page 79 Note: Drawing shown with Flange Mount (Part 11) actual Pump has 4-Bolt Pad Mount (see parts list next page) 9 - 3...
  • Page 80 9 - 4...
  • Page 81 Hydraulic Filter 1) Filter Element 400-1-319 2) Filter Head 400-1-319A (when ordering this part # items 3,4 are included 9 - 5...
  • Page 82 C) Turn adjustable screw on half turn, and then check pressure setting as outlined above. D) Continue this procedure until pressure gauge reads 2000 PSI. NOTE: If unable to obtain 2000 PSI contact your local dealer or Chandler Equipment Service Department at 1-800-243-3319 9 - 6...
  • Page 83 Section 10 Hydraulic Conveyor Drive...
  • Page 84 Conveyor Assembly 10 - 1...
  • Page 85 Hydraulic Conveyor Drive – Parts List Part # Description 16” Rear Roller Assembly A) HWC-R-1634 20” Rear Roller Assembly HWC-R-2034 24” Rear Roller Assembly HWC-R-2434 B) UCF-211-32 Flange Bearing 16” Front Roller Assembly C) GWC-F-1634 20” Front Roller Assembly GWC-F-2034 24”...
  • Page 86 Rawson Single Gear Case 10 - 3...
  • Page 87 Part # Description 1) 100-R-1-12A Plug Kit 2) N/A Washer 3) N/A Plug - Delrin (comes installed in pinion gear) 4) 100-R-1-08 Pinion Gear - 11 Tooth 5) 100-R-1-07 Drive Gear 67 - Tooth 6) 100-R-1-09 Inboard Housing - Single 7) 100-R-1-10 Outboard Housing - Single 8) 100-R-1-03...
  • Page 88 Rawson Single Gear Case with Sensor Port 10 - 5...
  • Page 89 Part # Description 1) 100-R-1-12A Plug Kit 2) N/A Washer 3) N/A Plug - Delrin (comes installed in pinion gear) 4) 100-R-1-08 Pinion Gear - 11 Tooth 5) 100-R-1-07 Drive Gear 67 - Tooth 6) 100-R-1-09 Inboard Housing - Single 7) 100-R-1-10A - LH Outboard Housing - Single w/ Sensor Port LH 8) 100-R-1-03...
  • Page 90 Rawson Twin Gear Case 10 - 7...
  • Page 91 Part # Description 1) 100-R-1-12A Plug Kit 2) N/A Washer 3) N/A Plug - Delrin (comes installed in pinion gear) 4) 100-R-1-08 Pinion Gear - 11 Tooth 5) 100-R-1-07 Drive Gear 67 - Tooth 6) 100-R-2-02 Inboard Housing - Twin 7) 100-R-2-03 Outboard Housing - Twin 8) 100-R-1-03...
  • Page 92 Rawson Twin Gear Case with Sensor Port 10 - 9...
  • Page 93 Part # Description 1) 100-R-1-12A Plug Kit 2) N/A Washer 3) N/A Plug - Delrin (comes installed in pinion gear) 4) 100-R-1-08 Pinion Gear - 11 Tooth 5) 100-R-1-07 Drive Gear 67 - Tooth 6) 100-R-2-02 Inboard Housing - Twin 7) 100-R-2-03A - LH Outboard Housing - Twin w/ Sensor Port LH 8) 100-R-1-03...

  • Page 94: Conveyor Motor

    Conveyor Motor Description Part # 1) MB180102AAAA Motor - Single Gear Case 400-R-106 4) MB120102AAAA Motor - Tandem Gear Case 400-R-104 5) MB Seal Kit (includes- 3, 4, 16, 17, 20, 25) 400-R-109 6) Motor Shaft - MB019002 400-R-111 *** When Ordering these parts have serial number available to insure proper parts 10 - 11...
  • Page 95 Section 11 Basic Set-Up & Operation – Control System...

  • Page 96: Basic Operation Of A Pull Type Spreader

    Basic Operation of Pull Type Spreader 1) Make sure that flow control valve is adjusted properly for spinner speed. 2) Raise gate for desired rate of application. 3) Adjust material divider accordingly. 4) Refer to operator’s manual for your rate controller on how to operate and calibrate controller.
  • Page 97 Setting Spinner Speed We recommend a spinner speed of 650–700 RPM as this unit is designed for a 50ft. spread pattern for fertilizer and a 30ft. pattern for lime. This spreader is equipped with a flow control valve to adjust spinner speed and to maintain a constant speed after your tractor reaches proper PTO RPM’s.
  • Page 98 3-1/4" Urea 3-3/4" NOTE: These are recommended settings and will vary according to material weight. NOTE: Chandler Equipment Co. recommends each spreader to be tested, using a pan test kit, every season to ensure proper spread pattern. 11 - 3...
  • Page 99 Flow Divider Assembly Overhead View 11 - 4...

  • Page 100: Section 12 Flow Divider Assembly

    Section 12 Flow Divider Assembly...
  • Page 101 Flow Divider Exploded View 12 - 1...

  • Page 102: Flow Divider - Parts List

    Flow Divider – Parts List Part # Description 300-FT-010 Flow Divider Assembly S.S. (Specify Floor Width When Ordering) 300-FT-011 Flow Divider Bar S.S. UCFL-204-10 5/8" Flange Bearing 300-FT-012 Flow Divider Adjustment Rod 300-FT-013 Flow Divider Hex Nut w/ Grease Zerk 300-FT-019 Flow Divider Gauge *Not Shown...
  • Page 103 Section 13 Maintenance & Troubleshooting...

  • Page 104: Proper Maintenance

    Extending the Life of Your Spreader through Proper Maintenance We at Chandler Equipment Co. are pleased that you have selected our equipment. We feel, as we are sure you do, with the high cost of fertilizers, repairs, and parts, that proper maintenance of equipment should be a high priority.
  • Page 105 D) Spinner Motors  Check spinner motor seals daily for leaks. If spinner motor seal is leaking replace immediately. This could cause serious damage to hydraulic system and spinner motor. 8) Material Divider Maintenance A) It is necessary for the material divider and spinners to be clean at all times. B) Where excessive moisture exists it may be necessary to clean the material divider and spinners while in the field to achieve the best possible spread pattern.

  • Page 106: Troubleshooting Procedures

    - these are - 0-1500 RPM hand tach and a 0-3000 PSI pressure gauge. These items can normally be purchased locally but if you have problems obtaining these items they can be purchased from Chandler Equipment Co. Description...
  • Page 107 If screwing in on the relief adjusting screw had none or little effect on the pressure, back adjusting screw out to its original position. NOTE: If unable to obtain 2000 PSI contact your local dealer or Chandler Equipment Service Department at 1-800-243-3319 13 - 4...
  • Page 108 B) Check spinner disc and blades for wear. a. Replace as needed. C) Check spinner speed. NOTE: If problems still persist or you have additional issues please contact your local dealer or Chandler Equipment Service Department at 1-800-243-3319 13 - 5...
  • Page 109 Section 14 Spread Pattern...
  • Page 110 Spread Pattern Adjustment We at Chandler Equipment Co. recommend performing a spread pattern pan test prior to each spreading season, after any spreader maintenance or modification, and periodically throughout the spreading season. A spread pattern test must be performed for each product to be applied to insure proper material application.
  • Page 111 Spinner Assembly Spinner speed is adjustable as outlined above, and is a major factor in a proper spread pattern. The best spinner speed will depend on the material being spread, and only obtainable by way of testing. Material properties play an important role in properly adjusting the spinner speed for the maximum spread pattern width.
  • Page 112 Spreader Preparation The spreader to be tested should be properly maintained and in good mechanical working condition in accordance with this manual. All damaged or worn parts should be replaced prior to completing the spread pattern test. Spinner discs, blades, and material divider should be free of any material build-up or rust.
  • Page 113 Data Recording 14 - 4...
  • Page 114 Data Recording Unacceptable Pattern Acceptable Pattern 14 - 5...
  • Page 115 Data Recording Using the data sheets supplied, document any and all adjustments made to the spreader while conducting the pan test. Using the funnel, transfer the contents of each catch pan into the corresponding test tube for its position. NOTE: It is highly recommended to only make ONE adjustment between each test. If more than one adjustment is made it will hard to determine which adjustment is responsible for the change in spread pattern shape.
  • Page 116 Acceptable Pattern Using a 3 Pass Switchback Driving Method 14 - 7...
  • Page 117 Spread Pattern Troubleshooting Problem Recommended Adjustments Heavy Directly Behind the Tractor 1) Move the material divider towards the back of the spreader. 2) Decrease spinner speed. 3) Check spinner blade condition. Light Directly Behind the Tractor 1) Move the material divider towards the front of the spreader. 2) Increase spinner speed.
  • Page 118 Notes: 14 - 9...
  • Page 119 1) Control System: Chandler Spreaders can be equipped with several types of control systems such as Raven, and TeeJet Technologies (Mid-tech) 2) Spreader Constants - 16” Mesh Chain Raven 180 CPR Rate Sensor 16" Chain Gate Opening Spreader Constant Rawson 67 CPR Gear Tooth Sensor 16" Chain...
  • Page 120 3) Spreader Constants - 20” Mesh Chain Raven 180 CPR Rate Sensor 20" Chain Gate Opening Spreader Constant Rawson 67 CPR Gear Tooth Sensor 20" Chain Gate Opening Spreader Constant DJ 360 CPR Rate Sensor 24" Chain Gate Opening Spreader Constant 1583 1187 14 - 11...
  • Page 121 4) Spreader Constants - 24” Mesh Chain Raven 180 CPR Rate Sensor 24" Chain Gate Opening Spreader Constant Rawson 67 CPR Gear Tooth Sensor 24" Chain Gate Opening Spreader Constant DJ 360 CPR Rate Sensor 24" Chain Gate Opening Spreader Constant 1319 14 - 12...
  • Page 122 4) This spreader is capable of very accurate and precise applications of fertilizer and lime when properly calibrated. Although Chandler Equipment Co. has tested this spreader to offer recommended setting, the final calibration and application of different materials is the RESPONSIBILITY OF THE OPERATOR.

This manual is also suitable for:

20 ptt-ft

Table of Contents

Save PDF