Before handling a memory module, discharge any static electricity by touching
a grounded surface or using a grounding wrist strap.
Do not insert objects with conductive material, such as metal screwdrivers or
graphite pencils, into the memory-module compartment.
Be careful in handling the metal plate of the memory door.
To avoid possible system problems, use only an approved memory module in
your computer.
Installing a Memory Module
Handle a memory module carefully. Hold them only by the edges.
To install a memory module:
1. Turn off the computer, unplug the AC adapter and remove the battery.
2. Turn the computer over so that the bottom faces up.
3. Using a screwdriver, remove the screw that holds the memory-module
compartment door in place.
4. Grasp the edge of the door and pull the door off the chassis.
66 Users Manual