Using The Lan; Configuring Network Environment - Samsung NA10 User Manual

MODEM Notes:
1. In order to use the 56K feature, be sure to check if the standards supported
2. If you use a PBX phone system, you can not connect using the 56K mode.
3. Internationally connected calls will be limited to 33.6K (Max.)

Using the LAN

Install the LAN cable by simply plugging the cable into the slot in the back of the
computer.
Your computer's LAN adapter is ready to use for most situations, however if your
system does not have a DHCP server or you wish to personally configure your LAN
connection, proceed as outlined in the "Configuring Network Environment" below.
Network Protocols:
You may need to consult your SysAdmin if their network protocols and settings
are required for your LAN environment.

Configuring Network Environment

Configure the Network Adapter as follows:
1. Click Start > Control Panel > Network and Internet Connections.
2. Click
3. Double-Click the icon
24 Users Manual
by the on-line service provider and the modem are identical.
icon (Network Connections).
(Labeled Local Area Network).