Summary of Contents for Frequency Central CHRONOGRAF
- Page 1 Frequency central Build documentation for: chronograf Featuring code by Jetroid Main PCB Pots ‘n’ sockets PCB...
- Page 2 Chronograf is a super flexible one-shot and cyclic event generator. It can be used as an envelope generator, LFO, or master clock. Chronograf features Start/Reset and Stop momentary switches, each with associated control inputs, as well as a tap tempo momentary switch. A toggle switch selects between one-shot and cyclic modes.
- Page 3 Chronograf puts out a reset pulse when Start/Reset is pressed. We realised that for some applications it would be useful for Chronograf to also put out a reset pulse when Stop is pressed. It’s an easy mod, just add a 1N4148 diode as shown to the rear of the PCB.
- Page 4 Pots ‘n’ sockets PCB 1. Place the PCB on a flat surface. Place the 2 tactile switches into their solder pad. Do not push them all the way through, they should sit proud of the PCB (see photo), their legs should not protrude through the other side.
- Page 5 RDH 15/08/19 http://www.frequencycentral.co.uk/...
Need help?
Do you have a question about the CHRONOGRAF and is the answer not in the manual?
Questions and answers