Subscribe to Our Youtube Channel
Summary of Contents for Mapesen MP6200
- Page 2 1.Turn on Plug the power supply and turn on the power supply switch. Power supply indicator light shining indicates turning on the video recorder. A�er the startup you will hear a beep. The default se�ng of video output is mul�ple-window output mode. Note: 4/8/16CH XVR no switch by default, power on can be started 2.Turn off...
- Page 3 4.Guide Follow the Guide to configure basic se�ngs when first using. Cloud: Enable Cloud service. Do not prompt: Close Guide prompt, then when system reboot, it will no longer pop up. Then Click “Next Page”, enter into the interface for QR code scanning. IOS: For IOS system app so�ware downloading.
-
Page 4: Product Mode
[DHCP Enable] Obtain IP address automa�cally. [IP Address] Set the IP address. Default: 192.168.1.18 [Subnet Mask] Set the subnet mask code. Default: 255.255.255.0 Make the equipment’s IP address and the router in the same network segment. For example, the router IP address is 192.168.1.1, and the subnet mask is 255.255.255.0. - Page 5 Click to enter into camera configura�on interface . Use to switch between the camera menu. Use choose the specific parameters. 7.Encode Our device take double code stream technology. Main stream is used for recording local. Extra stream is used for network transmission. So the local storage image high quality and the low bandwidth telecommunica�on are sa�sfied at the same �me.
- Page 6 8.2 Record se�ngs [Channel] Choose the corresponding channel number to set the channel. Choose the all op�on to set the en�re channels. [Length] Set the �me length of each video file. 60 minutes is default value. [Prerecord] Record 5 seconds before the ac�on. (�me length is decided by the code stream) [Mode] Set video state: Schedule, manual or stop.
- Page 7 8.3 Record query and playback Record querying condi�ons include: file storing place, record �me,record channel, record type (standard,sensor, manual). A�er chose the querying condi�on, If files exist, you can see the corresponding color displaying in the �me column, Click file list bu�on , you can see the files one by one displaying.
- Page 8 ，so please go to <internet op�on>--<safe>--<custom level>--<Ac�veX>, and enable all Ac�veX. 11.Public network access Cloud technology make access device in public network easily and conveniently. 11.1 Access by PC Open IE browser，enter into h�p://www.mp6200.top to log in Cloud service network website.
- Page 9 11.2 Access by mobile Network environment：WIFI, 3G,4G Terminal system ：Android, IOS Downloading place：google play，apple store.
- Page 10 MAPESEN TECHNOLOGY LIMITED www.mapesen.com 0086(755)-89345865 info@mapesen.com...
Need help?
Do you have a question about the MP6200 and is the answer not in the manual?
Questions and answers