Table of Contents
Advertisement
INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
Contents
1.
INTRODUCTION ................................................................................................................................... 3
2.
PRODUCT RATINGS ............................................................................................................................ 3
3.
PRODUCT WARNINGS ........................................................................................................................ 3
What's Included ..................................................................................................................................... 4
4.
5.
OVERVIEW ............................................................................................................................................ 4
6.
Batteries and Charger ............................................................................................................................ 4
6.1
Charging Batteries ........................................................................................................................ 4
6.2
Installing Batteries ......................................................................................................................... 4
6.3
Storing Batteries ............................................................................................................................ 5
6.4
Disposing of Batteries ................................................................................................................... 5
6.5
Safety ............................................................................................................................................ 5
7.
Installing Mounting Bracket .................................................................................................................... 6
8.
Using the wireless remote controller ...................................................................................................... 6
8.1
Using Wireless Remote Controller with Akron Brass Receivers ................................................... 6
8.2
Keypad User Interface .................................................................................................................. 7
8.3
LED User Interface ........................................................................................................................ 8
8.4
Synchronizing Wireless Remote Controller with Receiver ............................................................ 9
8.4.1
General Information .................................................................................................................. 9
8.4.2
Synchronizing Procedure .......................................................................................................... 9
8.5
LED Intensity ............................................................................................................................... 10
8.5.1
Increasing Brightness .............................................................................................................. 10
8.5.2
Decreasing Brightness ............................................................................................................ 10
8.6
Checking Battery Voltage ............................................................................................................ 10
8.7
Checking RF Radio Signal Strength ........................................................................................... 11
8.8
Battery Power Saving States ...................................................................................................... 11
8.9
Monitor Setup .............................................................................................................................. 11
8.10
Error Codes ................................................................................................................................. 14
9.
Configuring and updating the wireless remote controller .................................................................... 15
9.1
Connecting Wireless Remote Controller to a Web Browser ....................................................... 15
9.2
Using the Web Browser .............................................................................................................. 16
Sheet: 128129
STYLE 6047 Wireless Remote Control
PHONE: 800.228.1161
www.akronbrass.com
Revision 12/04/2020
Page: 1 of 27
Advertisement
Table of Contents
Summary of Contents for Akron Brass 6047
-
Page 1: Table Of Contents
Safety ............................5 Installing Mounting Bracket ........................6 Using the wireless remote controller ...................... 6 Using Wireless Remote Controller with Akron Brass Receivers ........... 6 Keypad User Interface ........................7 LED User Interface ........................8 Synchronizing Wireless Remote Controller with Receiver ............9 8.4.1... - Page 2 Factory Default ........................ 18 6047 Wireless Controller – Key Configuration Page ............... 18 9.2.2 6047 Wireless Controller – Modem Page ................19 9.2.3 6047 Monitor 1 / 2 Settings – Main Page ................20 9.2.4 9.2.4.1 Monitor Active ........................21 9.2.4.2 Display Type ........................
-
Page 3: Introduction
The following is intended to provide the basic instructions for installation, operation and maintenance of the Akron Brass Style 6047 Wireless Remote Controller, and to assist in attaining the best possible performance from the unit. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY, NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS, AND CAUTIONS. -
Page 4: What's Included
Keypad symbol quick reference card 5. OVERVIEW The Style 6047 Wireless Remote Controller allows the user to control up to two monitors and is compatible with all Akron Brass wireless receivers. It uses either a 900 MHz, or 2.4 GHz radio frequency to control the monitor. -
Page 5: Storing Batteries
▪ Do not dispose of batteries in a fire. ▪ Using any battery other than Akron Brass P/N 60470008 can potentially damage your Wireless Remote Controller. Failure to do this increases the chance of fire and will void your warranty. -
Page 6: Installing Mounting Bracket
The Wireless Remote Controller is designed to synchronize with the radio receiver used in a 6037, a 6042, and a 6052. It is designed to control Akron Brass monitors with wireless capabilities. The Wireless Remote Controller supports two different display types referred to as Enhanced and Legacy (See Section 9.2.4.2). -
Page 7: Keypad User Interface
STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS Keypad User Interface Straight Stream – While this key is pressed, the monitor nozzle pattern will be commanded to extend the pattern sleeve towards the straight stream flow setting. Stow / Deploy - When this key is pressed, the monitor will be commanded to Stow, or Deploy. -
Page 8: Led User Interface
STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS Monitor 1– When this key is pressed, all succeeding key presses will control Monitor 1. When Monitor 1 is selected, the keys will illuminate a green border. See section 8.3 Monitor 2 –... -
Page 9: Synchronizing Wireless Remote Controller With Receiver
STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS If your Wireless Remote Controller is operating in the legacy display type, then the Monitor Rotational LEDs will mimic the monitor panel light. The LEDs will be either green, or blue based on what monitor is currently active. -
Page 10: Led Intensity
STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS LED Intensity The LED Intensity is adjustable. Dimming the LEDs will prolong battery life. The brightness range is wide enough so that the optimum setting can be found for any lighting condition. LED Intensity can also be changed using the web browser (See section 9.2.1.7) -
Page 11: Checking Rf Radio Signal Strength
STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS Checking RF Radio Signal Strength RF radio signal strength can only be done when the Wireless Remote Controller is synchronized with a Receiver. To display the signal strength for Monitor 1, hold down the Monitor 1 key. - Page 12 STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS mode because the Monitor Rotational LEDs will either be Green or Blue alternate from illuminating the left and right side of the circle. PHONE: 800.228.1161 www.akronbrass.com Sheet: 128129 Revision 12/04/2020...
- Page 13 STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS The table below lists the setup function and corresponding code. Setup Menu Function LED Code Note Setup Mode Start slow blink Fog resets monitor Right Soft Limit Position Left Soft Limit Position...
-
Page 14: Error Codes
STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS 8.10 Error Codes If an error is detected, the code will be shown on the Monitor Rotational LEDs. You will know you have an error code because the Monitor Rotational LEDs will be red instead of the green/blue color that was showing monitor rotational operation range. -
Page 15: Configuring And Updating The Wireless Remote Controller
STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS Safe Operating Envelope is enabled, and rotation motion is not being permitted by external CAN device. 3-2 SOE Elevation Axis: Safe Operating Envelope is enabled, and elevation motion is not being permitted by external CAN device. -
Page 16: Using The Web Browser
STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS Using the Web Browser The AkronBrass.net home page is shown below. PHONE: 800.228.1161 www.akronbrass.com Sheet: 128129 Revision 12/04/2020 Page: 16 of 27... -
Page 17: 6047 Wireless Controller - Main Page
6047 Wireless Controller – Main Page 9.2.1 Select the 6047 Wireless Controller web page to view the Wireless Remote Controller’s Product Identification Number (PIN), its Firmware Version, setup power management settings, change the intensity of the LEDs, restore to factory default, and configure the keys. -
Page 18: Idle Time
6047 Wireless Controller – Key Configuration Page 9.2.2 Select the 6047 Wireless Controller – Key Configuration web page to reassign key positions to locations that better fit your needs. Once you have completed assigning functions to keys, make sure you locate the plastic tile on the keypad to match the web browser configuration. -
Page 19: 6047 Wireless Controller - Modem Page
6047 Wireless Controller – Modem Page 9.2.3 The 6047 Wireless Controller – Modem Page is useful if you are having RF Radio communication issues. The Modem Page shows the frequency band, signal strength, baud rate, and the count of good and bad data packets contained in the current RF Radio communication session. -
Page 20: 6047 Monitor 1 / 2 Settings - Main Page
The 6047 Monitor 1 / 2 Settings – Main Page is used to configure how the Wireless Remote Controller interfaces with a monitor. The 6047 Monitor 1 / 2 Settings – Main Page will show different items based on whether the Wireless Remote Controller is operating in enhanced, or legacy display type. For the screenshots below, Monitor 1 is showing the enhanced display type items, and Monitor 2 is showing the legacy. -
Page 21: Monitor Active
INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS 9.2.4.1 Monitor Active The Wireless Remote Controller can control two monitors. When viewing the 6047 Monitor 1 Settings page, Monitor Active will be “Yes” if Monitor 1 key was pressed. If you then navigate over and view the 6047 Monitor 2 Settings page, Monitor Active will be “No”, since the... -
Page 22: Elevation Ramp Time
STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS speed. Entering a non-zero value for ramp time will cause the monitor rotation to start out slow and then ramps up to give better position control. If “Off” is selected from the list, the rotation motor will instantly reach maximum speed. -
Page 23: Wifi Module Firmware Update
Browser interface. To update the WiFi Module firmware, perform the following steps. 1. Download 60xx000x_Rx-x.bin from akronbrass.com 6047 product page and store it on your PC. 2. Enable 6047 WiFi module, connect to akronbrass WiFi access point, browse to akronbrass.net. -
Page 24: Wifi Host Firmware Update
2. Enable the 6047 WiFi module, connect to akronbrass WiFi access point, browse to akronbrass.net. 3. Click on WiFi Host FW Update Note: Do not press any key on the 6047 during this procedure. 4. Click the Choose File button and browse to the file location for 60470001_Rx-x.hex and select it. -
Page 25: Firmware Update Failure
If this has occurred, perform the following steps. 1. Disconnect from the akronbrass WiFi access point. 2. Wait at least 1 minute. 3. Press any key on the 6047. 4. Re-connect to the akronbrass WiFi access point. 5. Browse to akronbrass.net/firmware 6. -
Page 26: Key Function Shortcut Table
STYLE 6047 Wireless Remote Control INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS 10. KEY FUNCTION SHORTCUT TABLE One or Two Keys Pressed Duration Action Comment Monitor 1 Function Long Synchronize Monitor Synchronize Monitor 1 key to control monitor 1. Monitor 2 Function... -
Page 27: Frequently Asked Questions
Akron Brass. Products must be promptly returned to Akron Brass for warranty service. We will not be responsible for: wear and tear; a failure due to having used any battery in the wireless remote controller other than Akron Brass P/N 60470008, any improper installation, use, maintenance or storage;...
Need help?
Do you have a question about the 6047 and is the answer not in the manual?
Questions and answers