Advertisement
Introduction
It allows you to turn the power on and off remotely as well as setting on/off schedule from
the mobile app.
Get to know your device
Button
Reset Button
• Return this device to default factory settings.
• Set this device on pairing mode so as to pair with a wireless switch.
• Please use a pin key tool to press and hold the reset button for ten seconds until
the LED light flashes twice.
LED Indicator
LED Status
LED flashing
Green LED solid on
Red LED solid on
LED flashing three times
Get Started
To get started, you will need:
• A Smart Gateway
• A Power Relay
• The mobile app
Then follow the steps below:-
1. Install the Power Relay.
The installation diagram below is one example of a possible application.
What It means
The device has not joined a network
The load is ON
The load is OFF
Enter pairing mode or return to default
factory settings
Page 2 of 5
Advertisement
