Attachments - Beurer MP 32 Instructions For Use Manual

5. Always ensure that the spindle can rotate freely. It must never be permanently
jammed; otherwise, the instrument will become too hot and suffer damage.
6. Check the results during treatment. This is particulary important for diabetics,
since their hands and feet are less sensitive.
7. After every use, apply moisturizing cream to the parts treated.

6. Attachments

Since the attachments are of a high quality and improper use can lead to injury,
handle the attachments carefully. Use extra caution when operating the device
at high speeds.
The following attachments are provided with your appliance:
1 – Flame milling cutter
Removes ingrown nails. Carefully guide the flame
cutter over to the treatment area in order to remove
parts of the nail as necessary.
2 – Cylindrical milling cutter
Grinds and smooths lignified foot nail surfaces. Apply
the milling cutter horizontally to the nail surface and
remo ve the unwanted layer of nail using slow circular
movements.
3 – Felt cone
Smooths and polishes the edge of the nail after filing
and cleans the nail surface. Always polish in circular
movements and do not allow the felt cone to rest in
one place.
4 – Sapphire cone
Removes dry skin or calluses from the soles of the
feet and heels; also manicures nails.
5 – Sapphire callus rasp
Rapidly removes stubborn calluses and hard skin on
the soles of feet and heels.
7