Related Manuals for Macnica Mpression 12G-SDI FMC Card
Summary of Contents for Macnica Mpression 12G-SDI FMC Card
- Page 1 Getting Started 12G-SDI FMC Card Revision 2017/10/13 2017/10/13 © 2017 Macnica, Inc. http://www.m-pression.com...
- Page 2 The information in this document (hereinafter called “Information”) is subject to change without notice. Macnica Inc. (Developer) makes no warranty of any kind regarding this document, or of any liability arising out of the application or use of information in this document, and assumes no responsibility for any errors that may appear in this document.
-
Page 3: Table Of Contents
4.1 Hardware Configuration ......................10 4.1.1 Hardware & Design Configuration ....................11 5. Hardware Setup _____________________________________________________________ 12 6. Procedure to Implement Reference Design ________________________________________ 13 7. Document Revision History ____________________________________________________ 15 Getting Started - 12G-SDI FMC Card © Macnica, Inc. -
Page 4: Read This First
Macnica Incorporated (hereafter Macnica Inc.) has no liability for any results arising from the use of the card. Macnica Inc. will attempt to provide either free or paid support to handle repair of faults or workarounds for faults with the card. This does not mean, however, that Macnica Inc. -
Page 5: Developer Information
Getting Started manual, and other documentation at any time, without prior notice to customers. Warranty: Macnica Inc. offers to exchange this card free of charge only in case of initial malfunction noticed by you within 30 days from the delivery. -
Page 6: For Ensuring Safe Use
Do not plug or unplug the power plug with wet or moist hands. This might cause injuries or equipment malfunctions or failures due to electrical shock. Getting Started - 12G-SDI FMC Card ©Macnica, Inc. - Page 7 Do not place the card in locations where excessive force might be applied to it. Doing so may cause the printed circuit board to warp, leading to breakage of the printed circuit board, missing parts or malfunctioning parts. Getting Started - 12G-SDI FMC Card © Macnica, Inc.
- Page 8 If condensation or moisture has occurred on this card, first wait for the moisture to fully evaporate before installing or connecting the card to other equipment. Operation of the card cannot be guaranteed if it has been disassembled, dismantled, altered, modified, or rebuilt. Getting Started - 12G-SDI FMC Card ©Macnica, Inc.
-
Page 9: Introduction
Reference design (You can download the documents and designs from the URL written in the Packing list. ) 3.3 Related Materials Materials provided by Macnica: Title (document number) 12G-SDI FMC Card Schematic (DATA_000070) 12G-SDI FMC Card Reference Manual (DCMT_000331) ... -
Page 10: Overview
Figure 4-1 shows a hardware configuration for implementing a reference design. Monitor that supports 12G-SDI input 12G-SDI signal generator 12G-SDI FMC Card Arria 10 GX FPGA Development board Figure 4-1. Hardware Configuration Getting Started - 12G-SDI FMC Card ©Macnica, Inc. -
Page 11: Hardware & Design Configuration
Hardware & Design Configuration Figure 4-2 shows the internal configuration of the reference design. 12G-SDI Monitor ( e.g. SmartView 4k ) 12G-SDI Pattern Generator ( e.g. Teranex Express ) Figure 4-2. Hardware Design Configuration Getting Started - 12G-SDI FMC Card © Macnica, Inc. -
Page 12: Hardware Setup
Use a BNC cable to connect the 12G-SDI monitor’s input terminal to CN4 on the FMC card. Figure 5-1. Arria 10 GX FPGA Development Board DIP Settings (The ■ indicates the side to which the switch has been slid) Getting Started - 12G-SDI FMC Card ©Macnica, Inc. -
Page 13: Procedure To Implement Reference Design
Arria 10 GX FPGA Development Board. ( 12G-SDI FMC Card ) ( 12G-SDI FMC Card ) D1-4 ( 12G-SDI FMC Card ) D3-D10 ( Arria 10 GX Development board ) Figure 6-1. Positions to Confirm LEDs Getting Started - 12G-SDI FMC Card © Macnica, Inc. - Page 14 • 12Gb: [D8, D9, D10] = “110” • 12Ga: [D8, D9, D10] = “111” FMC_1p8v FMC_3p3v FMC_12p0v 2p5v TX0_LOCK U1 (LMH1218) lock TX1_LOCK 12G-SDI FMC Card TX2_LOCK TX3_LOCK RX0_LOCK U5 (LMH1219) lock RX1_LOCK RX2_LOCK RX3_LOCK Getting Started - 12G-SDI FMC Card ©Macnica, Inc.
-
Page 15: Document Revision History
12G-SDI FMC Card 7. Document Revision History Date Revision Changes February 2, 2017 First Edition October 13, 2017 Updated design download URL. Getting Started - 12G-SDI FMC Card © Macnica, Inc.