Advertisement
Quick Links
TELEPORT GLT/GLR
High-Performance Active Guitar Signal Transmitter/
Receiver for Long Cable Run Systems
Connection
GLT
GLR
XLR female
XLR male
Guitar
Guitar amp
Getting Started
1. Connect the included power adaptor to the GLT power socket.
2. Connect your guitar to the GLT ¼" input via standard instrument cable.
3. Connect a balanced XLR cable from the GLT output to the GLR input.
4. With the amplifi er turned off or in standby mode, connect a standard instrument cable from the GLR output to your amp's input.
5. Power on your amplifi er.
6. Move the ground switch on the GLR to the LIFT position if grounding noise is audible.
7. Adjust the DRAG control to simulate the loading that occurs when you connect directly into an amp at close distance. More drag will simulate a longer cable.
Advertisement
Related Manuals for TC Electronic Teleport GLT
Summary of Contents for TC Electronic Teleport GLT
- Page 1 TELEPORT GLT/GLR High-Performance Active Guitar Signal Transmitter/ Receiver for Long Cable Run Systems Connection XLR female XLR male Guitar Guitar amp Getting Started 1. Connect the included power adaptor to the GLT power socket. 2. Connect your guitar to the GLT ¼" input via standard instrument cable.
- Page 2 Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of MUSIC Group IP Ltd.