Cadillac CT5 2020 Owner's Manual page 289

Cadillac CT5 Owner Manual (GMNA-Localizing-MidEast-13060107) - 2020 -
CRC - 8/29/19
Caution
Machine compounding or
aggressive polishing on a basecoat/
clearcoat paint finish may damage
it. Use only non-abrasive waxes and
polishes that are made for a
basecoat/clearcoat paint finish on
the vehicle.
To keep the paint finish looking new,
keep the vehicle garaged or covered
whenever possible.
Protecting Exterior Bright Metal
Moldings
Caution
Failure to clean and protect the
bright metal moldings can result in
a hazy white finish or pitting. This
damage would not be covered by
the vehicle warranty.
The bright metal moldings on the
vehicle are aluminum, chrome,
or stainless steel. To prevent damage,
always follow these cleaning
instructions:
Be sure the molding is cool to the
touch before applying any cleaning
solution.
Use only approved cleaning
solutions for aluminum, chrome,
or stainless steel. Some cleaners
are highly acidic or contain
alkaline substances and can
damage the moldings.
Always dilute a concentrated
cleaner according to the
manufacturer s instructions.
Do not use cleaners that are not
intended for automotive use.
Use a nonabrasive wax on the
vehicle after washing to protect
and extend the molding finish.
VEHICLE CARE
Cleaning Exterior Lamps/Lenses,
Emblems, Decals, and Stripes
Use only lukewarm or cold water, a
soft cloth, and a car washing soap to
clean exterior lamps, lenses, emblems,
decals, and stripes. Follow instructions
under "Washing the Vehicle"
previously in this section.
Lamp covers are made of plastic, and
some have a UV protective coating. Do
not clean or wipe them when dry.
Do not use any of the following on
lamp covers:
Abrasive or caustic agents.
Washer fluids and other cleaning
agents in higher concentrations
than suggested by the
manufacturer.
Solvents, alcohols, fuels, or other
harsh cleaners.
Ice scrapers or other hard items.
Aftermarket appearance caps or
covers while the lamps are
illuminated, due to excessive heat
generated.
289