Page 2
Installation The it-Receive is compatible with PC and Mac. • E nsure your computer is on. • Plug the it-Receive into a spare USB socket. • Y our computer will recognise the it-Receive and install the driver software it needs. • T he computer will load several different drivers, so may take up to one minute to do this. • You will be informed when the process is complete. The range of the it-Receive will be impaired if it is placed behind the computer, or close to large metal objects, or sources of ...
Page 3
Before they can communicate with each other they must be paired by following this procedure: 1. Ensure the it-Receive is connected to your computer. 2. P lace the transmitter to be paired close to the it-Receive (within 1 metre). 3. P ress and release the PAIR button on the front of the it- Receive. The red light next to it will begin flashing.
Page 4
Further information If you pair a seventh transmitter with the it-Receive, the device used least recently will be replaced. To erase all the pairing information from the it-Receive press and hold the PAIR button for about 3 seconds. Paired devices will operate up to 10 metres (32 feet) apart. The other two lights on the front of the it-Receive indicate when Drag Lock (e.g. on an it-Roll) is being used and when Caps Lock is selected on the computer keyboard.
Page 5
• B atteries in transmitter flat - replace intermittently. batteries. • O ut of range - move transmitter closer to it-Receive. • I nterference - move transmitter and it-Receive away from sources of interference (e.g. mobile phone). • I nterference - fully shut down and restart computer. Devices will not pair. • N o batteries in transmitter, or ...
Page 6
Maintenance Your Simply Works device contains no user serviceable parts. If it does not work as expected consult the troubleshooting guide. If there are still problems with the device please contact your supplier. Warranty Your Simply Works device is warranted against defects in manufacture or component failure. The unit is designed for domestic and educational applications. Use outside these areas will invalidate the warranty. Unauthorised repair or modification, mechanical abuse, immersion in any liquid or connection to incompatible equipment will also invalidate the warranty.