Heininger PortablePET TWISTEP Instruction Manual

TWISTEP
To ensure the best service and satisfaction from your PortablePET TWISTEP, please read and follow all
instructions, recommendations, and warnings. Heininger Holdings, LLC is not responsible for damage or
injury due to misuse of the TWISTEP product. And we always want to hear from you about our products
and service. Contact us at info@heininger.biz.
VERIFY ALL PARTS ARE INCLUDED IN PACKAGE:
TWISTEP® Hardware List
• 1- Hex Key
• 1- ½"x1.5" Receiver Bolt
• 1 ½" Lock Washer
• 1- 2" Aluminum Sleeve (already attached)
If you find a discrepancy, call us and we will help with any issues or questions.
Toll Free 888-722-5240

Installation of the Twistep

We have assembled the TWISTEP for the most-common height in either 2" x 2" or 1 ¼" x 1 ¼"
installations. Your vehicle may require that you adjust the TWISTEP height, depending on the clearance
for the TWISTEP to operate properly and to rotate correctly when it is not in use. The goal is to have the
TWISTEP as high as it can be, yet still clear the underneath of the vehicle when you twist into the not-in-
use position.
Instructions Manual
®
(Pacific Coast, USA Time Zone)
2222 Queen Street, Bellingham, WA 98229-4753 USA
Ph: 360.756.2411 Toll Free: 888.722.5240 Fax: 360.756.2414
Web: www.heininger.biz - Email: info@heininger.biz
Version 1.4
1 | P a g e
Heininger Holdings, LLC