Page 1
○ Power up the CET device for 30 seconds ○ Power up the Solar Analytics device 3. What device are we dealing with? ○ PMC-220 — straight-through connection. ○ PMC-340-BA — straight-through connection. ○ PMC-340-BB — 3P4W method: using the White CTs. ...
Page 2
4. PMC-220 ○ Hardware installation Straight through connection MB-63 Modbus D (+) and D (-) (NOT ) are to be connected to Terminal 7 ...
Page 3
7. Final check — voltage test! Solar Analytics is unable to do a remote phase-swap with the CET Meter, hence, the installation has to be correct on the spot! ...