Installation Accessory - Pioneer TST-MLD-I-WP24 Installation & Owner's Manual

1. Safety precaution
NOTE
The speci ed cables shall be applied in the wiring. No external
•
force may be applied to the terminal. Otherwise, wire cut and
heating may occur and result in re.

2. Installation accessory

Select the installation location
Don't install at the place where cover with heavy oil, vapor or sulfureted
gas, otherwise, this product would be deformed that would lead to
system malfunction.
Preparation before installation
1. Please con rm that all the following parts you have been supply.
No. Name
1
Wire controller
2
Installation and owner's manual
3
Screws
4
Wall plugs
5
Screws
6 Plastic screw bars
7
Battery
8
The connective wires group
Screw(Only available for the shielded
9
wire with connection plug)
10
Magnetic ring
Qty.
1
1
3
M3.9X25 (For Mounting on the Wall)
For Mounting on the Wall
3
2
M4X25 (For Mounting on switch box)
For xing on switch box
2
1
Optional
1
M4X8(For Mounting the connective wire group)
1
Use the magnetic ring to hitch the connective cable of the wire controller.
1
Remarks
2