Warranty Disclaimer; Declaration Of Conformity - QNect QN-IPC03 Quick Start Manual

Safety
‐ To reduce risk of electric shock, this product should only be opened by an authorized
technician when service is required.
‐ Disconnect the product from the mains and other equipment if a problem should
occur.
‐ Read the manual carefully before use. Keep the manual for future reference.
‐ Only use the device for its intended purposes.
‐ Do not use the device if any part is damaged or defective. If the device is damaged or
defective, replace the device immediately.
Warning!
‐ Do not use cleaning solvents or abrasives.
‐ Do not clean the inside of the device.
‐ Do not attempt to repair the device. If the device does not operate correctly, replace it
with a new device.
‐ Clean the outside of the device using a soft, damp cloth.
‐ The product is intended as an IP security camera for outdoor use.
Consult the local laws and regulations for security cameras before using and installing

Warranty Disclaimer

Eltra nv assumes no liability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the product or from failure to observe the operating
instructions and/or safety notes.

Declaration of Conformity

Eltra nv, Pachtgoedstraat 2, 9140 Temse, Belgium, hereby declares that
the product comprising QN-IPC03- 416000005 is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU.
The original declaration of conformity can be requested at info@eltra.be
Support
‐ Detailed operating instructions are available at www.qnecthome.com
EN