Edit Name - Samsung SyncMaster 400DX-2 User Manual

→ , → ENTER
Adjusts the Transparency of PIP windows.
• High
• Medium
• Low
• Opaque
Note
• PIP turns off when the LCD Display is switched to an external source.
• For PC and DVI, this is deactivated if the cable is disconnected.

Edit Name

MENU → ENTER →
→ , → ENTER
Name the input device connected to the input jacks to make your input source selection
easier.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game /
Camcorder / DVD Combo / DHR / PC / BNC / HDMI / Component / AV / DVI
Note
• The displayed devices differ depending on the external input mode.
• When connecting a PC to the HDMI or DVI terminal, set Edit Name to PC. In other cases,
set Edit Name to AV. However, since 640x480, 720P (1280x720), and 1080p (1920x1080)
are common signals for AV and PC, make sure to set the Edit Name in accordance with
the input signal.
• The Picture menu changes depending on the input signal and Edit Name.
Adjusting the LCD Display
→ ENTER → → →