Connecting The Video Out To Tv - Samsung HT-DS900 Instruction Manual

Connecting the Video Out to TV

Make sure that turn off and disconnect the plug from outlet before moving or installing the product.
In connecting to video, select one of following three methods that suits for TV and connect it.
Composite Video ............... Good Quality
METHOD 1
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the sys-
tem to the VIDEO IN jack on your television.
Scart ............... Better Quality
METHOD 2
If you television is equipped with an SCART input, connect an Scart Jack (not supplied)
from the AV OUT jack on the back panel of the system to the SCART IN jack on your televi-
sion.
For using the SCART cable
• If Scart is equipped for your TV, set RGB-COMPOSITE selector
of the center unit to RGB. You can get a better picture quality by
using Scart setting.
• If Scart (RGB Input) is not equipped for your TV,
set RGB-COMPOSITE selector to COMPOSITE.
Component (Progressive Scan) Video ............... Best Quality
METHOD 3
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the cor-
responding jacks on your television.
•
When the Progressive scan mode is selected, the VIDEO and SCART outputs
Note
do not feed any signal. See page 14 to select Progressive Scan.
13
METHOD 3
METHOD 1
METHOD 2
COMPOSITE
RGB
COMPOSITE
RGB