Remote Control - Samsung HT-DS910 Instruction Manual

Description

—Remote Control—

TV, DVD POWER button
TV/VIDEO, DIMMER button
OPEN/CLOSE button
EZ VIEW, NTSC/PAL button
STEP button
DSP/EQ button
PL II MODE button
VOLUME button
MENU button
RETURN button
Number(0~9) buttons
SLEEP button
LOGO COPY button
SLIDE MODE button
9
TV indicator
DVD RECEIVER indicator
MODE button
DVD button
TUNER BAND button
SUBTITLE button
SLOW, MO/ST button
REPEAT button
Play/Pause button
VOLUME
Tuning Preset/CD Skip button
PL II EFFECT button
TUNING/CH button
INFO button
MUTE button
Direction/Enter button
TEST TONE button
SOUND EDIT button
TUNER MEMORY / P. SCAN button
ZOOM button
CANCEL button
REMAIN button
DIGEST button
Insert Remote Batteries
1
Remove the battery
cover on the back
of the remote by
AUX button
pressing down and
sliding the cover in
the direction of the
arrow.
Stop button
Follow these precautions to avoid leaking or cracking cells:
Caution
•
Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
•
Use the correct type of batteries.Batteries that look similar may differ in voltage.
•
Always replace both batteries at the same time.
•
Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
2 3
Insert two 1.5V AAA Replace the battery
batteries, paying atten- cover.
tion to the correct
polarities (+ and –).
To open the remote control cover, push the
top of the cover, then slide downward.
10