Pivot Breath Sensor Quick Start Manual page 10

SENSOR MAINTENENCE
Charging Your Sensor
1. Plug the smaller end
of the charging cable
(included) into your
sensor's charging port.
1 8
USB
2. Plug the USB end of the
cable into your computer
or a USB compatible
hub/wall charger (not
included).
3. Device will display a
"Battery fully charged"
message when finished.
We recommend charging
your sensor every 4–7
days or whenever your
battery is low.
4. You cannot give a
breath sample while
device is charging.
Disconnect device from
cable before use.
19