Spectronics MiniMo Manual

Sending a MiniMO or MightyMO card in for a software upgrade

Before sending in a MiniMO or MightyMO card for a software upgrade you will
need to save your pages as a package. All changes you have made will be lost
during the upgrade unless you do this. A simple backup will not save your voice
recordings, so your pages need to be saved as a package or otherwise you will
need to re-do your recordings. Please follow the steps below to make a
package. If you are unable to successfully do this please inform us of this when
you send the card in to be upgraded.
If at any stage you have difficulties with any part of this process please feel free
to call us for further assistance.
To package your pages on a MiniMO or MightyMO
1. Put your USB stick in one of the USB ports on the device.
2. Press the blue Setup button on the title bar to open the Mo Setup window.
3. Press Page Browser to open the Page Browser menu.
4. Select the folder that contains pages that will be included in the package
in the left side of the window.
5. In the right sides of the window select the check box beside each page
that will be included in the package OR put a cross in the Select All option
if all pages in the selected folder will be a part of the package.
6. Select Sharing Operations to open the Sharing Operations menu.
7. Select Package from Pages to open the Enter Package Name menu.
8. Put a cross in the Show All Directories check box. Additional storage will
be displayed in the left viewport. The USB stick will show up as
UMS_FOLDER. Make sure you select this. It should turn grey when it has
been selected.
9. Press in the empty text box down the bottom next to Name to open the
system keyboard window.
10. Use the system keyboard to enter a name for the package.
11. Select OK to create the package.
12. The Select Files for Package menu will close. A window will open with the
message: "Creating package. Please wait." Then, the window with the
message will close.
13. Select OK to close the window with the message.