Leader Light LL ARC MINI LINE WHITE Series User Manual

LL ARC MINI LINE WHITE
LL40 205 LL40 215 LL40 225
CoMPLIMENTS oN yoUR PURCHASE!
All dimensions are in milimeters
1200
600
300
following items are included:
- LL ARC MINI LINE with 5m cable and 6pin LINE connector
- LL BRACKET MINI LINE FIX
- User manual
Additional items needed:
- LL ARC DRIVER
- DC power supply 24V
- Controller compatible with DMX
- Mounting accessories (adjustable bracket)
- Screws and washers M6
Content:
01 SAfETy INfoRMATIoN
01.1 Risk of eyes damage
01.2 Protection from electric shock
01.3 Fire prevention
02 PRodUCT SPECIfICATIoN
02.1 Technical Specification
03 INSTALLATIoN
03.1 Unpacking
03.2 Physical installation
03.3 Electrical installation
03.3.1 Connecting to AC/DC power supply
03.3.2 Connecting to LL ARC DRIVER for intensity/colour control
04 MAINTENANCE
ENvIRoNMENT
Do not throw away the appliance with the normal household waste at the end of its life,
but hand it in at an official collection point for recycling. By doing this, you help to preserve
the environment.
©MMX - Leader Light – All right reserved
01 SAfETy INfoRMATIoN
Leader Light s.r.o.
M.Gorkeho 33
SK-052 01 Spisska Nova Ves
Slovakia
WARNING!!!
www.leaderlight.eu
USER MANUAL Carefully read before installing, powering or servicing.
Nothing to do if anything misunderstand! Installation can be done only
by a qualified professional in accordance with relevant local codes.
01.1 Risk of eyes damage
- Do not look directly into LED lamps.
- Do not look into light beam from a distance of less than 40 cm (16 inches)!
01.2 Protection from electric shock
- Shut down power before installation or maintenance.
- Luminaries, Driver and recommended power supply must be installed by a qualified
professional in accordance with relevant local codes. Only acceptable source of power and
frequency that complies with local building and electrical codes to use.
- Do not use or do not connect the products if the power cable, power plug or fixtures are any
way damaged, wet, or if they are overheating.
- Do not modify, alter, or attempt to service the LeaderLight appliance. Doing so will void the
warranty.
- Before removing or installing any cover or part of appliance disconnect from power.
operation only with dC 24v source! By using a high voltage AC power supply-danger
of electric shock!
1 pc.
01.3 fire prevention
1 pc.
1 pc.
- Follow all safety consideration.
- Thermostatic switches or fuses never to bypass.
- Device never shield – minimum distance around fitting must be 50mm (2 in.).
- LEDs never direct cover with filters or other materials.
- Allowing max. ambient temperature is 40°C (104°F).
02 PRodUCT SPECIfICATIoN
02.1 Technical Specification
Lamp type: 1200mm: 96xW TOP LED (White)
view Angle: 120°
Control data Input: 1 channel 24V dimming
Power input: 1200mm: max. 8W
Power connection: 24V DC 5m cable with 6pin LINE connector
Net weight: 1200/600/300mm: 1kg/ 0,6kg/ 0,3kg
Dimensions LxΦ: 1200/600/300mm x 38mm without bracket
Ambient temp. (Ta): Maximum 40°C
Materials and finish: End cups: plastic
Installation: Any position for ceiling, wall and surface-mounting
600mm: 48xW TOP LED (White)
300mm: 24xW TOP LED (White)
Lifetime: Long 100 000 hrs 60% degradation
600mm: max. 4W
300mm: max. 2W
IP: IP20
Cooling: Conventional
Cover: frosted PMMA
Edition: A - 2010
03 INSTALLATIoN
03.1 Unpacking
- Unpack carefully.
- This is electronic equipment and should be handled carefully.
- Damaged delivered package or if are any mechanical parts broken – it must be claim
immediately by the transport company. Photo pictures as evidence are valuable or
future claim.
03.2 Physical installation
- Loading capacity of bearing area has to be at least 10 times the weight of all device
clusters (luminaries, clamps, cables, ...).
- Hairbreadth from combustible materials is 0,5m.
03.3 Electrical installation
- To tackle all Safety Information- 01!
- You can suffer a dangerous electric shock by using a high voltage AC/DC
power supply - by touching the AC/DC power supply wires inside LL ARC MINI LINE!
- LL ARC MINI LINE can be operated in two ways:
- 03.3.1 LL ARC MINI LINE connecting to DC POWER SUPPLY - for switch ON/OFF
luminaries
- 03.3.2 LL ARC MINI LINE connecting to LL ARC DRIVER - for intensity and colour
control
03.3.1 Connecting to dC power supply
(Figure Nr. 1.1)
- LL ARC MINI LINE must be connected to the device- MW power supply
IN:100-260AC/ OUT: 24V.
- It is not necessary to open fixture before connecting to MW power supply.
AC Power Supply Cord plug connections to MW Power supply:
Symbol Pin Wire Colour
L live brown
N neutral blue
ground (earth) yellow/green
03.3.2 Connecting to LL LEd dRIvER
(Figure Nr. 1.2)
- For intensity and colour control is necessary connection with LL ARC DRIVER.
- It is not necessary to open fixture before connecting to LL ARC DRIVER.
- Before installing of LL ARC DRIVER carefully read USER MANUAL for LL ARC DRIVER.
If you have any question please, contact support@leaderlight.sk
Screw (US)
yellow or brass
silver
green