Getting To Know Your Donut Maker; Before Using For The First Time; Using Your Donut Maker - Bella MINI DONUT MAKER Instruction Manual And Recipe Manual

Getting to know your donut maker

Product may vary slightly from illustration
Donut plates

Before Using For The First Time

• Remove all parts included in the box.
• Wash all the parts thoroughly (refer to Cleaning and Maintenance section for more information).
NOTE: Your Donut maker may emit a small amount of smoke and/or odor when you use it for the first
time. This is normal and harmless, however we recommend that you do not eat the first donut you make
with the Donut maker.

Using Your Donut maker

1. Plug the cord into your 120 V AC wall outlet.
2. The Red Ready Light will turn off when the appliance reaches proper cooking temperature.
Once heated, ready times will be faster.
3. When the Red Ready Light turns off, using the handle, lift the top lid to the open position
and apply a light layer of vegetable oil, olive oil or canola oil to the cooking plates.
Pour and spread the donut batter evenly onto the lower plate so that the batter fills the lower
plate and the peak areas of the plate are covered.
CAUTION: DO NOT USE COOKING SPRAYS. THEY CAN CAUSE A BUILD-UP ON THE COOKING
PLATES AND MAY AFFECT THE NON-STICK PERFORMANCE OF THE PRODUCT.
4. Using the handle, lower the top lid.
5. Allow the Donut maker to cook for 2 - 3 minutes, according to recipe directions. The Red READY
light will cycle on and off as the unit maintains baking temperature.
6. When the Red ready light turns OFF, using oven mitts gently open the lid by lifting the lid handle;
if it pulls, continue baking for 30 seconds and test again. If the donuts need to bake to a darker
finish, close the lid and continue cooking at 20 second intervals until the desired color
is achieved.
7. Wearing oven mitts, remove donuts from the cooking plates using a non-metallic utensil.
A wooden or heat-proof plastic spatula can be used to remove the donuts.
CAUTION: To avoid damage to the non-stick surface, never use any sharp, pointed or metal objects.
WARNING: Cooking surfaces are hot, do not touch; use caution until cooking plates are cool.
8. To make more donuts, close the Donut maker until the Red Ready Light appears off, then repeat
from step 4.
9. When finished baking donuts, remove plug from wall outlet.
10. After it has sufficiently cooled, the heating plates may be wiped clean.
17207_17208_17209_BELLA Mini Donut IM_r0.indd 4 17207_17208_17209_BELLA Mini Donut IM_r0.indd 4
Red
Ready Light
4
Handle
2020-06-25 10:22 PM 2020-06-25 10:22 PM