Related Manuals for Taoglas EDGE Locate
Summary of Contents for Taoglas EDGE Locate
- Page 1 User Guide EDGE Locate ™ High Precision GNSS Solution Taoglas EDGE Locate High Precision GNSS Solution ™ set up instructions www.taoglas.com EL.1A EDGE Locate User Guide Rev 02/20...
- Page 2 EDGE Locate ™ High Precision GNSS Solution User Guide Contents Contents Introduction What’s in the Box? Hexagon SmartNet Set Up U-Center Install U-Center Device Setup Using Hexagon Smart Net with u-center EL.1A EDGE Locate User Guide Rev 02/20...
-
Page 3: Key Features
Supplied with 30 days Hexagon Correctional Services • Subscription • PMOD compatible and easy to integrate into third party hardware • The EDGE Locate is supplied with a PMOD to USB adaptor and USB cable. Typical Applications Micro Mobility Agriculture and Robotic Professional... -
Page 4: What's In The Box
1. Quick Start Guide 2. Taoglas EDGE Locate 3. USB adapter 4. Micro-USB cable 5. Error Correction Service Trial Activation Card (Optional) Datasheet For further information on the antenna used, the AGPSF.36, please refer to the EL.1A EDGE Locate User Guide Rev 02/20... - Page 5 Hexagon SmartNet Set Up A one-month free trial of Hexagon SmartNet is included with your EDGE Locate. Please find an activation card like the one below amongst the contents of the packing. Follow the instructions on this card to activate your trial. After submitting your details, you will receive an email with the following information included: –...
- Page 6 3. Please read through the license agreement and click ‘I Agree’ if you agree to the terms. 4. Click ‘Next’ on the install components screen. 5. Then keep the default installation location and click ‘Install’. 6. Once the installation is completed, click ‘Finish’. u-center is now installed. EL.1A EDGE Locate User Guide Rev 02/20...
- Page 7 U-Center Device Setup 1. Connect the EDGE Locate module to the USB Adapter interface board as below. 2. Connect the micro-USB included in the package to both the interface board and your PC. If you have an active internet connection, the driver required for this USB interface will install automatically in the background.
- Page 8 Select receiver > ‘baudrate’ > ‘38’400’ b. Select receiver > Connection > ‘COMXX’, where XX is the COM port which the EDGE Locate is connected to. See the ‘Additional Note’ on page 10 for help in determining the COM Port.
- Page 9 Using Hexagon Smart Net with u-center 1. To use the Hexagon correction service, perform the steps outlined above to connect to the EDGE Locate module. In addition to this please perform the following steps: a. Select receiver > ‘NTRIP Client’...
- Page 10 2. After a few moments of receiving corrections, the ‘Fix Mode’ status at the top right of the screen will include either ‘FLOAT’ or ‘FIXED’ indicating whether the EDGE Locate has a Fixed or Floating RTK solution. Additional Note: In situations where more than one COM port can be selected in u-center, please determine which Port is the correct one, by following the three steps below: 1.
- Page 11 All copyrights, trademarks and any other intellectual property rights related are owned by Taoglas Group Holdings Limited.
Need help?
Do you have a question about the EDGE Locate and is the answer not in the manual?
Questions and answers