Assistant AH-1075l Operation Manual

JUMBO DISPLAY LED ALARM
CLOCK
Model AH-1075
O P E R A T I O N M A N U A L
– 1 –
ENGLISH ENGLISH
Move the FUNCTION switch to «NORMAL»
the time & calendar settings are ¿ nished
B SNOOZE ALARM SET:
Move the FUNCTION switch to AL SET
ALARM SET  hour part is blinking press [UP]
to set the alarm hour Be
or [DOWN] key
careful to set AM or PM correctly
 minute part is blink-
Press [MODE] key
ing; press [UP] or [DOWN] key to set the
alarm minute
Press [MODE] key again the snooze
interval minute is blinking; here you can set snooze
interval from 1 minute to 60 minutes by pressing
 You can ignore this step the
[DOWN] key
default snooze interval is 5 minutes
Move the FUNCTION switch to «NORMAL»
the alarm setting is ¿ nished
C TURN THE SNOOZE ALARM ON/OFF
Move the [ALARM ON/OFF] switch to «AL
ON» ALARM ON  an AL indicator
will be on
display That means the snooze alarm function
is activated When the set alarm time is up the
alarm sound starts
 the clock will stop
a Press [SNOOZE] key
alarm temporarily; the alarm sound will start again
– 5 –
ENGLISH ENGLISH
1
2
3
AL. SET
RESET
NORMAL T. SET AL. ON AL. OFF
4
10
6
DOWN UP MODE
11
9
12
-
+
PAT. NO.: 200630056218.5
13
– 2 –
ENGLISH ENGLISH
after the snooze interval ends After doing so four
times repeatedly the snooze alarm function will
stop working
b If there is no man-made stop the clock will
alarm for 1 minute every snooze interval four
times totally After that the snooze alarm function
stops working
c Press any key except of [SNOOZE] the
snooze alarm function will stop working
d Move the [ALARM ON/OFF] switch
«AL OFF» ALARM OFF  the snooze alarm
function will stop working till the [ALARM ON/OFF]
switch is moved to «AL ON.»'
3. 12/24 HOUR MODE
Under normal state press [DOWN] key
select 12 or 24 hour mode
4. HOW TO READ ALARM TIME, MONTH
AND DATE
Under normal state press [SNOOZE] key
For the ¿ rst time you can see the set alarm time;
press [SNOOZE] key for the second time and
hold it within 3 seconds and you can see the set
– 6 –
ENGLISH ENGLISH
PM indicator
ALARM indicator
FUNCTION switch
[RESET] key
[ALARM ON/OFF] switch
[SNOOZE] key
[MODE] key
[UP] key
[DOWN] key
CR2032 button cell included
8
Button Cell compartment
5
DC Jack
7
Button Cell cover
1. FUNCTIONS
Time
Hidden Calendar Year Month Date
Snooze Alarm
2. HOW TO SET
At ¿ rst connect the DC 6V adaptor to the DC Jack
 The display will be on l12:00| Then open
the INSTRUCTION HOLDER to remove the clear
insulator in the Button Cell compartment
– 3 –
ENGLISH
month and date; then press [SNOOZE] key
again or leave it for 3 seconds  and the clock
will return to the normal working state
5. RESET
If the clock is dead the display does not move
during setting s or working please use a slim
but blunt object like ball pen pointer toothpick
 then the clock will
etc to press RESET key
to
return to the initial mode
6. CLOCK BACK-UP
CR2032 button cell is to maintain clock opera-
tion in the event of blackout or other power failure
to Normally it can be used for 5 or 6 years depend-
ing on the frequency or duration of power failure
7. MAINTENANCE
Please use a soft cloth or a paper towel to clean
 the clock Do not use any corrosive cleanser or
chemical solution on the clock
Please keep the instruction paper inside of the
INSTRUCTION HOLDER for future use.
– 7 –
ENGLISH
A TIME SET:
Move the FUNCTION switch
TIME SET  hour part is blinking; press [UP]
to set the hour Be careful
or [DOWN key]
to set AM or PM correctly When the PM time is
set under 12-hour mode a PM indicator
be on display
Press [MODE] key
ing press [UP] or [DOWN] key
minute
Press [MODE] key
blinking press [UP]
return to «00» second This step is to ensure set-
ting the clock accurately
Press [MODE] key
is blinking it stands for year the initial year is
2006 press [UP] or [DOWN] key
the year from 2000-2099 
Press [MODE] key
ing press [UP] or [DOWN] key
the month
Press [MODE] key
ing press [UP] or [DOWN] key
the date

– 4 –
ENGLISH ENGLISH
– 8 –
ENGLISH ENGLISH
to «T SET»
will
 minute part is blink-
to set the
 only second part is
or [DOWN] key to
 the display of 4 ¿ gures
to set
 month part is blink-
to set
 date part is blink-
to set
ENGLISH
ENGLISH