Table of Contents
Advertisement
notetaker is not charging, it will display "power xx%". When the battery level is lower than 15%, the
Seika Braille notetaker will alarm step-down three tones Mi-Lai-Do every 8 minutes. When you plug
in the USB cable connected with wall adapter or PC, the Seika Braille notetaker will beep step-up two
tones Do-Mi and display "usb charging". When the battery is charged fully, the Seika Braille
notetaker will beep step-up three tones Do-Lai-Mi, and it will display "charged full".
Press Space +e (1-5 + Space) or Enter or Joystick Left to exit. When the battery level is lower than
5%, the Seika Braille notetaker will alarm step-down four tones Fa-Mi-Lai-Do, and shut down
automatically. The Seika Braille notetaker will save the current editing file which named
"TEMP0000.TXT" in the root directory
2.8.2 Update
tls>update
This feature allows you to update the firmware. You need to download the update BIN file into the
USB flash disk, and plug it into the Seika Braille notetaker USB slot. Press Enter and the Seika
Braille notetaker will update the firmware, and it will take about 8 seconds. After the update is
completed, it will beep twice and display "pls restart". Then turn off the Seika Braille notetaker and
restart.
NOTE: Do not remove the USB flash disk or turn the power off when updating the firmware or
the Seika Braille notetaker firmware will be corrupted.
NOTE: If the update process fails, and the Seika Braille notetaker cannot work, don't worry,
42
Advertisement
Table of Contents
