Xtreme Power 61017 Owner's Manual And Safety Instructions

Xtreme Power 61017 Owner's Manual And Safety Instructions

Compactor 2.5hp 79cc

Advertisement

COMPACTOR 2.5HP 79CC
ITEM: 61017 / 61018
OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER)
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 61017 and is the answer not in the manual?

Questions and answers

Summary of Contents for Xtreme Power 61017

  • Page 1 COMPACTOR 2.5HP 79CC ITEM: 61017 / 61018 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH...
  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY WARNING DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied with this product or optional equipment.
  • Page 3 IMPORTANT SAFETY INFORMATION Operate the plate compactor on flat, level surfaces only. Turn the engine OFF when the compactor is not in use. DO NOT operate or service this machine before reading this entire manual. Never operate this equipment without proper protective clothing, shatter proof ANSI-approved glasses, steel-toed boots, and other protective job site devices.
  • Page 4: Drive Belt

    INTRODUCTION APPLICATIONS The Plate compactor is a machine that compacts the ground and it intends to make the surface smooth, by transmitting vibration through vibrating plate, which power generated from single motor in vibrator case This machine is suitable for making the ground surface smooth, such as leveling the soil and beaching, finishing the asphalt paving.
  • Page 5: Parts Diagram

    PARTS DIAGRAM...
  • Page 6: Parts List

    PARTS LIST...
  • Page 7: Prior To Operation

    OPERATION PRIOR TO OPERATION Make sure that all dirt, mud, etc., are thoroughly removed from the unit prior to operation. Special effort should be given to the bottom face of the vibrating plate and those areas adjacent to the cooling air inlet of engine, carburetor and air cleaner.
  • Page 8: Gasoline Engine

    OPERATION GASOLINE ENGINE 1. Turn the STOP SWITCH clock-wise to the 2. Open the fuel cock. position “I” (ON). 3. Set the speed control lever 1/3 to 1/2 of the 4. Close the choke lever. If the engine is warm or way towards the high speed position.
  • Page 9 OPERATION 1. As the engine warms up,gradually move the 2. Move the speed control lever from the LOW to choke lever to the OPEN position. the HIGH position. When the engine speed reaches approximately 2,300-2,600 RPM,the centrifugal clutch engages. If the engine speed increased very slowly,it is possible that the clutch can slip.
  • Page 10: Storage And Maintenance

    STORAGE AND MAINTENANCE STORAGE FLAMMABLE LIQUID: Stop engine and do not smoke or allow work in immediate area when refuelling. Fire or explosion could result from flames or sparks. MOVING PARTS: Shutdown engine before performing service or maintenance. Contact with moving parts can cause serious injuries.
  • Page 11: Care And Preventative Maintenance

    MAINTENANCE CARE AND PREVENTATIVE MAINTENANCE Check the oil level in the motor crankcase daily. Check the vibrator oil level weekly. Inspect the rubber anti vibration mounts for wear or deterioration Clean the underside of the plate regularly to prevent a build up. Clean the underside of the plate regularly to prevent build up.
  • Page 12: Troubleshooting

    TROUBLESHOOTING...
  • Page 13: Warranty

    WARRANTY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

This manual is also suitable for:

61018

Table of Contents